Kammback Restoration

mojobean · May 24, 2008, 08:17:53 PM

Quote from: Eagle Kammback on November 24, 2007, 11:53:45 AM
THEY ARE PERFECT!!!!!!

you lucky you!!!

those are the rear seat backs i REALLY want. (vinyl) my bench is vinyl, but any split seat backs i find are fabric. I suppose i could recover them but it just wont be the same.

eaglesx4 · May 24, 2008, 09:41:45 PM

The wire wheel covers look good but they were popular when I grew up

Eagle Kammback · April 28, 2009, 01:29:10 PM

I was waaaay off when I thought the Kammback had a more solid foundation than the wagon

what is the black stuff in the one picture, oily/greasy stuff
how do I remove the interior "undercoating" type stuff

priya · April 28, 2009, 01:55:59 PM

Quote from: Eagle Kammback on April 28, 2009, 01:29:10 PM
what is the black stuff in the one picture, oily/greasy stuff
how do I remove the interior "undercoating" type stuff

Not sure what black stuff you're referring to, but to remove the interior undercoating stuff use a sharp paint scraper, or if its really tough what I've used is a sharpened wood chisel and a hammer - use a shallow angle so you don't gouge the metal. I see some oily/greasy stuff in one picture, might be able to get that up with a solvent and a rag or maybe even use gasoline on it (be careful about fire! always have an extinguisher handy). Or if its on the undercoating it will come up when you scrape the undercoating off. The paint scrapers get dull fairly quickly, but one style has replaceable blades and even those and the non-replaceable blade ones can be sharpened on a grinder if you have one. That's my preferred method because its cheaper than buying replacement blades or scrapers and a lot faster than taking a break to drive to the store. After you've scraped the worst of the undercoating off remove the remainders and any paint with an air sander and/or sand blaster to get a surface you can recoat or patch with metal as need be. Any spots of undercoating where the metal is solid and the undercoating as well I leave as is unless you need a couple of inches of perimeter for a metal patch. No need to make extra work for yourself.

Route 66 Rambler · April 28, 2009, 06:27:46 PM

That oily stuff is an asphalt compound they use to seal between overlapping body panels. Since a lot of panels are only spot-welded into place, there is warpage a lot of times between the spot welds, and that stuff helps keep it weather tight and reduce noise.

IowaEagle · April 29, 2009, 08:08:15 PM

All repairable.

Eagle Kammback · April 29, 2009, 11:26:09 PM

Yes, repairable
but I can't afford to fix that right now. Can't get her into the vo tech body shop since school is over in 2 months
Will have to try for next year
I would do it myself, but I know nothing about this, and the gas tank is right there
the pictures don't show the damage to its full extent, most of the rear floor pan needs replacing

thereverendbill · March 03, 2011, 06:28:45 PM

I know this is a pretty dead topic. As some know this car recently went for sale and as of about 15 minutes ago I paid off the balance owed and I now own this car. Getting it back on the road is going on number 1 priority as soon as it arrives home.

I would like to keep this thread alive with the progress of the car because this car has history on the site (former eagle of the month winner april 2007) and there is no way i can take that away from the car.

Stay tuned for updates, write ups, and pictures

El Matador · March 03, 2011, 06:33:16 PM

GASP! You mean Eagle Kammback no longer has a Kammback?

Isn't that like Superman without a cape?

Eagle Kammback · March 03, 2011, 06:36:27 PM

Quote from: El Matador on March 03, 2011, 06:33:16 PM
GASP! You mean Eagle Kammback no longer has a Kammback?

Isn't that like Superman without a cape?

I guess I'll have to change my screen name haha, but I already have people who just know me as "Kammback" haha
I got in over my head with this car and I'm glad she's going to somebody who can do what I can't.

thereverendbill · March 03, 2011, 06:43:14 PM

i say leave the name, I have no thought's of changing mine to "thereverendbill who now owns a kammback"

IowaEagle · March 03, 2011, 08:11:08 PM

Good to see Kyle's Kammback went to a good home and is still in the Nest.

vangremlin · March 03, 2011, 09:25:32 PM

Congrats to thereverendbill!

thereverendbill · March 03, 2011, 10:05:30 PM

I am going to give kyle the honor of the first drive in the kammback once it is finished and street legal

83Eagle! · March 03, 2011, 10:08:40 PM

Bill, I am glad you are keeping this topic alive. It shows history of the Kammback. I like that. Eagle Kammback I think you should keep your screen name. That is what everyone knows you as.

Bill, can't wait to see what you do with it. I am glad it went to a good home.

News:

Kammback Restoration

eaglesx4