1980 Eagle Sport STW 258+TF998 "Silver Beast" (from Finland)

[juhap]

I did take seat belt apart and put some greased it. Now old one works musch better, new one saved to an other project.

It took a couple of hours to get mirror control to fit. Had to reshape its mounting piece.

Hood release was not original and it moved just a little. So I removed it and greased it too. Now it is OK. Trying to find a correct one,



Driver side air duct slipped out and it did not want to go back. Had to remove it and what did I found. No wonder, it had a severe damage. And that´s why I couldn´t open air went at all.



Used hor air gun and wood blocks... Nice...



I noticed a hanging loose pink wire tjat wasn´t there before. What a heck...
Fuse holder had pink going in, but nothing comes out. It had broken, bit long time ago. Wires were stuffed in it. Bought a new one and problem solved. Hazard lights are working now.

When dash and parcel shelf were assembled togetherand courtesy light fixed, found out that heater blower did not work. 

After that disappointment started to fix wipers. Motor of, no locking clip there. Mounted rihgt wiper body and nut. New clip and all done. But wipers did not work... 

Then it was time to fix blower. Easy job just plug in... And then parcel shelf again...


There is not a lot of loose parts to mount...



Needs some fasteners, wiper blades, Tail gate wiring...

[juhap]

Got those BMW tubular nuts for those larger holes. It was childs play to clic original fasteners.



After that sprayed hollow section wax inside sills.