News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • December 03, 2024, 12:31:59 PM

Login with username, password and session length

Author Topic: Low Compression. Missing on cold start  (Read 8606 times)

0 Members and 1 Guest are viewing this topic.

Offline TheBirdman

  • huffs gear oil
  • Eagle DL
  • ***
  • Posts: 173
  • Thumbs Up 12
  • that noise? that ll go away.
Re: Low Compression. Missing on cold start
« Reply #15 on: November 15, 2021, 02:39:03 PM »
I dont know all what the cec system does with timing, because on my eagle I knew right away that I wasnt going to spend the enormous effort to make all the 40 year old emissions garbage work, so I ripped it all out and stuck an HEI and motorcraft in it. No offense to anyone who wants to put in that effort, you do you, but Ive got too many hobbies to make doing the Sisyphus routine one of them.
« Last Edit: November 15, 2021, 02:41:17 PM by TheBirdman »
83 eagle wagon 4.0

Offline Illeagle1984

  • Manic Mechanic
  • Premium Member
  • Eagle
  • *****
  • Posts: 114
  • Thumbs Up 14
Re: Low Compression. Missing on cold start
« Reply #16 on: November 16, 2021, 06:22:08 PM »
On a normal CEC controlled spark, the signal goes from the distributor to the CEC computer, which adjusts the timing as it sees fit before relaying the signal to the ignition control module.  Non-CEC goes from distributor straight to ignition control module.  I'm nearly 100% sure the ignition boxes are the same.

Edit: the CEC looks at a few different things to decide how to change the timing.  It can also play with the air/fuel ratio as it sees fit.  These are mainly based on engine temperature and oxygen sensor input, but I'm sure there's more than just that.
« Last Edit: November 16, 2021, 06:28:40 PM by Illeagle1984 »
It's getting crowded down here:
1973 Ford Mustang "Rustang"
1984 AMC Eagle Sedan "IllEagle" 183k
1984 AMC Eagle Wagon "Eagle 2"
1996 Cadillac Eldorado 178k
1998 Oldsmobile Eighty-Eight 239k
2002 Cadillac Eldorado Doral Edition
2005 Chevrolet Silverado 1500 179k

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 529
  • Thumbs Up 52
Re: Low Compression. Missing on cold start
« Reply #17 on: November 17, 2021, 04:04:24 PM »
Dangit Birdman, you know my autistic feelings about this car. Taking the computer out isn't illegal around here but my OCD would keep me up at night! ;)

It's a little different for later model Eagles but for the 82 model year the computer has no direct control of the spark timing. It requires the use of a three connector "Yellow grommet" Duraspark II module. The extra connector permitting for electronic spark retard. It cannot advance timing beyond the base timing. This is why stock Eagles have such advanced base timing.
For the '82 Eagle when the CTS and the TAC switches say the coolant and air cleaner temperature is cold the computer electronically leaves the timing alone so for cold running it's "more advanced than normal" and the only thing that can change it is the vacuum and mechanical advance. In that regard this means it can still technically manipulate timing indirectly using the Sol-Vac to bump the idle speed but that's it. It has three levels of idle speed to play with and they are not adjustable once set to spec.
Once the two switches satisfy the CeC retards spark timing and adjusts up and down from there as it needs to. This is why an Eagle with disconnected or faulty temperature switches (or you replace the uncommon yellow grommet with a more common two connector blue grommet module and leave the computer disconnected) can knock so badly on hot days. It doesn't retard the spark timing for the hot engine and acts like its over-advanced.

That I have seen in the 84 and later Eagles I have salvaged parts from the computer intercepts the TACH going to the ignition module directly and plays with spark timing from there, presumably because the CeC now runs double duty for both engine management and the knock sensor, so I cannot say for certain how that later system works. Amusingly if you buy a Carter Engine Knock Eliminator it does the exact same thing and intercepts the TACH before reaching the Duraspark.

Among the countless hours I've been under this hood all the related systems have been tested and are known good. Since the problem is only happening with the engine cold we can immediately rule out computer intervention.

Anyways I inspected the cap and rotor and found them to be fouled. That would certainly cause the peculiar cold miss on a cylinder that had good compression.
« Last Edit: November 17, 2021, 05:05:24 PM by MIPS »

Offline TheBirdman

  • huffs gear oil
  • Eagle DL
  • ***
  • Posts: 173
  • Thumbs Up 12
  • that noise? that ll go away.
Re: Low Compression. Missing on cold start
« Reply #18 on: November 17, 2021, 05:30:06 PM »
I am merely here to tempt you away from the way of the true and righteous.
83 eagle wagon 4.0

Offline Canoe

  • Eagle Sundaancer
  • ******
  • Posts: 1150
  • Thumbs Up 54
Re: Low Compression. Missing on cold start
« Reply #19 on: November 19, 2021, 07:51:58 PM »
... for the 82 model year the computer has no direct control of the spark timing. It requires the use of a three connector "Yellow grommet" Duraspark II module. The extra connector permitting for electronic spark retard. It cannot advance timing beyond the base timing. This is why stock Eagles have such advanced base timing. ...
I'd like to be sure I'm understanding this.
Does the "extra connector permitting for electronic spark retard" provide an adjustment to the timing that the Duraspark module responds to, or is that extra connector delivering the actual adjusted timing & dwell signal that the Duraspark module drives the coil with?

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 529
  • Thumbs Up 52
Re: Low Compression. Missing on cold start
« Reply #20 on: November 27, 2021, 11:54:33 AM »
The former, I believe. I'd have to attach an oscilloscope to verify. The 82 model computer has TACH as input-only so my guess (all speculation after this point) is using the known engine RPM from that and all the sensor data the computer is able to pulse the spark retard line extremely fast either immediately after the TACH arrives at the module to fire the coil or before the next pulse arrives.
« Last Edit: November 27, 2021, 12:03:57 PM by MIPS »

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 529
  • Thumbs Up 52
Re: Low Compression. Missing on cold start
« Reply #21 on: February 01, 2022, 10:33:19 AM »
Nah, it's still doing it. *head scratch*
We just had some wild cold -20 and -30 weather and the engine started and ran like a champ, so we can rule out a malfunctioning intake heater. This morning it again did that thing where it would sit there idling and sounding like it was missing an at least one cylinder. Checked my cabling and that changed nothing, warmed it up a bit more and drove off. Like before as soon as I hit the hill I got a distinct miss and loss of power but kept the pedal where it was. Sputtered completely out and was flooded.
Well that can't be right. The choke is correctly set.
Okay so we've ruled out poor compression, bad plugs, bad cables, bad grounding, a bad distributor cap and rotor, an improperly set carb and choke, the manifold heater and last week the coil was replaced because the Echlin was beginning to leak oil. That only leaves either the distributor pickup or the ignition module. RockAuto still sells the special yellow grommet the 82 used so I guess I'll grab that on payday. It's about the only component I have absolutely no way to test

Offline rmick

  • Eagle Sport
  • ****
  • Posts: 397
  • Thumbs Up 43
Re: Low Compression. Missing on cold start
« Reply #22 on: February 01, 2022, 05:07:53 PM »
When it occurs can you put a timing light on the plug wires one at a time and watch the light  to see  if it happens on one or all plugs? Or the coil wire and see if the light skips a beat when missing.
72 Javelin AMX
72 Javelin SST
72 Gremlin with 4.0
81 SX 4

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 529
  • Thumbs Up 52
Re: Low Compression. Missing on cold start
« Reply #23 on: February 04, 2022, 06:34:59 PM »
Oh, that will be fun.
I'll keep a spare timing light in the trunk but that's about the best I can do in a pinch.

 

SMF spam blocked by CleanTalk