Ready for some new wheels. I know there is plenty of info on here but most seem on getting used wheels off other cars to work.
Id like some "craiger" or "aero" steel wheels. Right now I have the stock steel rims with 235/75/15 good year wranglers.
I also have a 1in aluminum spacer on the rear to fill the wheel wells a bit. As of now I am very happy with the stance the eagle has.
I figure Id be able to go to a 8in wide rim or a 7in wide rim from the 6in wide I have now.
Here are the craigers I found that I would like.
https://www.summitracing.com/parts/crr-3425812p/overview/15x8 5x4.5 bolt 4.5 backspacing and 6mm offset Think id get away with those?
The aero wheels I really like but seems only some are DOT approved and the closest Ive found on Summit are these.
https://www.summitracing.com/parts/aeo-50-184530s/overview/15x8 3in backspace and -38mm offset. This could be way off
In a perfect world Id have the aeros, matching the stock or close to it. Wider rim preferred by a inch. But it looks like the Craiger will be the more straight forward option unless someone else has any pointers.
Not trying to have someone do my homework for me but wont stop anyone from posting a link from Summit/Jegs with the best option for fit from those two wheels.
as for fender fitment I already have them trimmed a bit and not afraid to do some banging and bending. This is kinda turning into a rat rod rally dirt road ripper.
Any tips or advice is greatly appreciated.
and these might not even be close since Im still trying to figure out the math.