Well she's back in the shop again. Figured I'd update you guys here since I know there are a few of you not on Facebutt. Thought I would start a thread for the forum so you guys can stay in the loop and so if my mechanic has any questions he can ask the community here.
Dustin is another AMC nut from Southwestern Utah and I found him on theamcforum. He's restored several FSJs and currently has a 62 Rambler Cross Country. He's done some great work, but I'm not doing a full on restore. Just want her ready to drive!
Here's a link to one of his restorations.
http://fsjnetwork.com/forum/viewtopic.php?f=12&t=9536Anyway, I've been lazy with Penny and haven't touched her in over a year and I've been looking at purchasing a daily driver cause I'm tired of sharing a car with my wife. After thinking I could spend 2-3k on a daily I decided I might as well put that much into my Eagle to get it daily ready. Found Dustin and he was willing to take on the project.
I borrowed a trailer from a neighbor and tried a test run with the Eagle loaded with our 2002 WJ with the 4.7, but it was way too taxing on the transmission so I also borrowed my neighbor's Dodge Ram 3500 Dually. That did the trick and now the car is in the shop.
I just got it to him on 2/14/17 and he already got it started, but there is now oil getting to the top of the engine.
"Definitely lots of engine noise. All coming from the top of the motor. Found that the drivetrain wasn't getting any oil up top. Pulled the sending unit and cranked the engine. Had oil down low. But it's not getting up top."
I look forward to getting this thing all ready to go...finally! Years later!
BONE DRY
Video of it running.
https://www.facebook.com/dustin.langston.9/videos/10210628286856410/