So, I am running 205 75 15's. I still have the factory spare w/ the original tools in the trunk area and was wanting a properly sized spare. I still want it to fit in the factory location under the rear deck/through the hatch.
I did the math and a 205 15 75 has a circumference of 85.1". Definitely larger than the factory spare. I did a little more math (almost ran out of fingers and toes) and found that a 145 80 18 has a circumference of 85.2". It just so happens that a newer VW Tiguan has a 5 lug factory spare 145 80 18. The lug pattern is "slightly" different. It measures 112mm, where the Eagle measures 114.3mm. I'm thinking for an emergency spare, it should work just fine. I ordered the wheel and I will update the post. I just don't want a full sized spare mounted to the roof rack on road trips. If the fit in the trunk is tight, I will deflate the spare until it fits (I have the factory onboard air pump under the hood) If I have to, I will slightly mod the lug holes, as an emergency spare, it isn't bothering me "yet"
Anyone else do something similar?