There are no C-clips in the AMC 15 that we have in our Eagles. The pumpkin does not need to be touched.
1. Loosen large axle nut after removing cotter key.
2. Loosen wheel nuts.
3. Jack up wheels off the ground.
4. Remove wheels and brake drums.
5. Pull the hubs with a hub puller if you have one.
6. Remove the brake lines from the wheel cylinders.
7. Remove the four nuts holding the bearing cap on.
8. Pull the backing plate and axle out.
9. Press the bearings off and inspect everything for wear, especially where the axle splines with the hubs.
If you do not have a hub puller you can pull the axle with the hub and brake backing plate attached and take it to a shop that can pull it. Have a large wrench to loosten the axle nut.