Eagle1983' AMC Eagle Sedan

[Eagle1983]

   I finally have a Eagle, It is a 1984 Eagle 30 Sedan, it is two tone brown, I will try to get some pics up this weekend of the car, Found it in Stanton MI, Paid 3000 for it,the seller who was a older gentleman mentioned he was selling it because the slipped on the ice last winter and broke his hip and was out of work so he had to sell it, put about 4-6 thousand into it, it was his fifth eagle if I remember correctly, bough first one when they had first came out. The underside barely has any surface rust, driver side door has a little on bottom, The car has manual windows and locks, all original.The vinyl top is in good shape, only has one of two small places where the stitching is starting to come apart. The seller had put on a New carb-tried two rebuild but had bad luck so put on a new factory original one, new steering box,new brakes,new coolant lines, even had a new air filter, last oil change was 1,000 miles ago, and had a full tank of gas, interior looks almost spotless, except for one mark on the front passenger seat. Drove it all the way home for 4 hours straight, only used 3/4 of a tank of gas, was mostly on highways going 65-70, also took a few back roads, hit one very steep hill though and had to about floor it to stay at 50 MPH, also did a brake test when I hit a green light entering a town doing 50 just to find out it was a T. has 143,500 miles on engine, only problem is that it looks like one of the valve gaskets is leaking some oil, engine is a bit covered in it on the bottom, but the temp gauge never got above half way the whole time driving home and the oil was still full. back suspension also needs new shocks. besides that good car, also interior is tan. Also missing amc Hood badge, Just double checking the 1984 model did have switch on the fly right, the switch does not say you have to stop but was just making sure as Wiki says 1985 but does not really mention it for 1984. Also my father mentioned while looking at it that one of the covers for the safety pin on the center of the front drivers side tire come off and the barring might need repack. Have a nice day.

[83Eagle!]

Sounds like a nice Eagle.  I know I have seen some hood ornaments show up for sale from time to time.  Is that what you are missing on the hood or is it one that has the chrome edge with the Eagle emblem?

[Eagle1983]

Sounds like a nice Eagle.  I know I have seen some hood ornaments show up for sale from time to time.  Is that what you are missing on the hood or is it one that has the chrome edge with the Eagle emblem?

It is the one on the hood, like what the concord would have had.

[83Eagle!]

Sounds like a nice Eagle.  I know I have seen some hood ornaments show up for sale from time to time.  Is that what you are missing on the hood or is it one that has the chrome edge with the Eagle emblem?

It is the one on the hood, like what the concord would have had.

Those come up for sale from time to time.  I will have to see if I have one.  I am also planning another trip to the local U-Pull-It.  tried to buy an Eagle or two with no luck that likely ended up there last week.  I'll look and see if either has one.

[MudPuppy]

1983 was the last year for the "stop and Switch 2wd - 4wd"
1984 and up was Shift on the Fly...so you're good to go 
Congrats on the new Eagle. Looking forward to pics.

[Eagle1983]

Thanks, I have check ebay but the Hood top medallion/ornament seems to go for a good amount. Good luck with the search. Have a nice day.

[Eagle1983]

I was also wondering if anyone would have to have a steering wheel for sale, the three spoke ones like on wagoneers with the lather wrap and the fake wood in the center that is round. like on the limited edition vehicles.

[thereverendbill]

that AMC ornament is kinda  pain to find,  i ended up putting a power bulge hood on my wagon so that i don't need that emblem

[IowaEagle]

Congrats on your new Eagle.  If it has the OE plastic valve cover then I suggest you seriously get an aftermarket aluminum one.  Don't waste your time and money trying to get the OE one not to leak at this late date.

[83Eagle!]

Congrats on your new Eagle.  If it has the OE plastic valve cover then I suggest you seriously get an aftermarket aluminum one.  Don't waste your time and money trying to get the OE one not to leak at this late date.

Agreed.

[Eagle1983]

I was wondering I have noticed on a few forums that people mention giving there cars names, who started that idea exactly and what is it about, also what names have already been Taken.

[Eagle1983]

Took Eleanor out for the first time in the snow today, was surprised when I first pulled out of the driveway though, has a bit of a incline, must have hit ice because my back wheels or wheel not to sure if it was both started to spin. Had her in 4 wheel drive, must be the tires, last owner put normal all weather sedan tires on her not to long ago, back up then forward before I tried to pull out to make sure the 4 wheel drive was engaged, happened to me a second time later and she actually died on me.

[IowaEagle]

So, did you determine if you were in 4WD, or not?

[Eagle1983]

So, did you determine if you were in 4WD, or not?

I am pretty sure it was in 4 wheel drive, switched the selector to it drove forward and backwards a couple of times, then let it sit for a few minutes before I drove, might just be the tires. They are not winter or snow tires, just normal all season tires. My local mechanic did not seem to see anything wrong with the hoses and she runs fine.there is one hose connected to the carb, the second one down from the top, that is still connected to the carb but not connected to anything else. Has some type of gauge or something one it. Not to good with vacuum system. I do not think it is anything important though. 

[jim]

If it's in 4 wheel drive you should be able to spin all 4 tires on ice.