Rita--and others interested:
This is called a envalve, go to their website on my first post which I did not get much response, usually "rebuild the engine"!!
$50 is much less and worth a try so I did it!
It replaces the oem pcv, made of some type of plastic, hooks up exactly as the oem in the valve cover and hose to carb.
The original "fresh air intake" hose is cut to about 1" and plugged with included tapered plug (be sure to use a hose clamp).
This was the last step in engine/emissions/ignition mods.
There are NO leaks anywhere,valve cover,air cleaner housing,rear main--nowhere!!!
@ 102k miles I am amused by the constant complaints about mileage, poor performance, etc. with the 258, I can break any speed limit in Colorado at high altitude and still get 25+ mpg, city and highway combined
This is with the STOCK BBD carb,all emissions removed @ 6000 to 11,000 ft altitude, I am well pleased with the 83 SX/4!!
This is NOT a Ferrari, just a fun little car, just happens to have 4wd!