News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • October 09, 2024, 09:55:01 PM

Login with username, password and session length

Author Topic: torque converter or tranny?  (Read 18679 times)

0 Members and 1 Guest are viewing this topic.

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
torque converter or tranny?
« on: November 02, 2011, 11:19:48 AM »
my 80 Spirit has a problem. It seems to have lost 3rd gear. It runs around fine if I shift it into 2, but if it is in drive it has nothing after shifting up from second. Like it is in neutral. I know the 80 Spirits came with both lockup and non-lockup TC, could this just be a bad lockup converter?
is there any way to identify which converter without pulling the tranny?
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline BenM

  • AMC Eagles Den Addicted
  • ********
  • Posts: 1512
  • Thumbs Up 74
  • Pittsburgh, PA
Re: torque converter or tranny?
« Reply #1 on: November 02, 2011, 11:49:26 AM »
You may be able to read printing on the torque converter if you take the inspection cover off, but I don't recall any external differences.

According to my 76 TSM, third gear is both the front and rear clutches engaged. The rear controls all gears, but the front is only ever applied in 3rd and Reverse.  I don't see any mentions of 3rd gear only not working. How's your reverse?
NSS#47184

1987 AMC Eagle Sedan -- 1976 Pacer Coupe -- 1968 Pontiac Tempest Custom S -- 1940 Mercury (& a 2002 Jetta Turbodiesel, 5 spd., the Wife's Daily Driver)

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #2 on: November 02, 2011, 11:53:57 AM »
reverse is fine. I can back up all day long. That's why I am thinking a lockup TC that is failing to lock
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline eaglebeek

  • Eagle Sundaancer
  • ******
  • Posts: 889
  • Thumbs Up 70
Re: torque converter or tranny?
« Reply #3 on: November 02, 2011, 05:39:42 PM »
The lockup doesn't engage until after the transmission has shifted to 3rd gear and the car is moving forward at around 35 mph (depending on final drive ratio). I doubt the torque converter is the cause.

I'm thinking one of the clutches/bands has failed. The other consideration is a hydraulic fault. Have you noticed if the shift quality or speed at which shifts occur have changed since your malfunction showed up?

I can do some research and come up with a better answer tomorrow (Thursday). Meanwhile, if someone else has an answer please post up!
1984 Eagle Wagon, 258, auto, 2.73 gears, daily driver
1983 Eagle Limited Wagon, parts; sold
2000 Jeep Cherokee, 4.0, auto
2007 Hyundai Accent, radical downsize from minivan, wife's car and she loves it!

"The society which scorns excellence in plumbing as a humble activity and tolerates shoddiness in philosophy because it is an exalted activity will have neither good plumbing nor good philosophy: neither its pipes nor its theories will hold water."--John W. Gardner, in "Excellence: Can We Be Equal and Excellent Too?" (1961)
 
Air-conditioning is so cool!

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 3028
  • Thumbs Up 167
Re: torque converter or tranny?
« Reply #4 on: November 02, 2011, 08:17:28 PM »
You may be able to read printing on the torque converter if you take the inspection cover off, but I don't recall any external differences.

According to my 76 TSM, third gear is both the front and rear clutches engaged. The rear controls all gears, but the front is only ever applied in 3rd and Reverse.  I don't see any mentions of 3rd gear only not working. How's your reverse?

There is numbers however they are stamped on the inside. I cannot tell if I ever had a lockup by driving them. I know by tearing them apart I I had some.

Here comes the stupid answer. My 82 concord is in neutral from park to drive till I go half go to second than back to drive at takeoff. I need to adjust it.

Whats my response to your problem. He[% if I know not even sure if I have a lockup yet. Just saying check linkage.

Anyone that knows my responses, knows I only typy say one sentence. So read carefully.



Manitowoc WI

Offline DaemonForce

  • Grease Magnet
  • Eagle Limited
  • *****
  • Posts: 525
  • Thumbs Up 8
Re: torque converter or tranny?
« Reply #5 on: November 03, 2011, 06:13:01 AM »
It's time for an overhaul kit.
1983 Limited
AMC 258C {R2:27.Jun.13}
Carter 2681 {R2:28.Oct.12}
TorqueFlite A998 {R6: -20.Apr.12}
NP129 {R2:28.Apr.12}
M35-273 {???}
Compression: 0
Corrected Idle: 0RPM

Rebuild:
???

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #6 on: November 03, 2011, 07:50:31 AM »
yeah, I am figuring it's time to learn how to rebuild one.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #7 on: November 03, 2011, 08:03:15 AM »
it's not the linkage. Works fine in 'D' until it's time to shift into 3rd. Then it's nothing until I slow down enough to hit the downshift into 2nd.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #8 on: November 03, 2011, 12:44:01 PM »
Sounds like the passing gear linkage is jammed down. Or the high forward clutches are burnt out. Not the converter or it wouldn't go anywhere.

It's up to you if you want to try this, but I have a number of times in the past and it revived most of the transmissions I did it to. A can of STP engine oil treatment in the trans. Drive it around a bit with that in there before heading for highway speeds so it gets good and warmed up and mixes in. Then cruise up to 35ish and back off the gas, put it in drive and coast about 10 seconds before trying the gas.
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #9 on: November 03, 2011, 01:58:45 PM »
I'll try anythin at this point. What have I got to lose? Worst case I will be rebuilding....
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline HappyPappy

  • Eagle DL
  • ***
  • Posts: 205
  • Thumbs Up 5
Re: torque converter or tranny?
« Reply #10 on: November 04, 2011, 06:10:06 AM »
Might try SEA FOAM to, I've used it in engines already with great luck. 904 aren't hard to rebuild, helps if you have the right tools. Good luck

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #11 on: November 04, 2011, 06:56:18 AM »
I tried seafom for transmission last night. No help. Have done a lot of reading on the net about Torqueflites, gonna have to rebuild.
have to get something else on the road first as I need transportation to work.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline shanebo

  • Without "me" its just "aweso"
  • AMC Eagles Den Addicted
  • ********
  • Posts: 2335
  • Thumbs Up 71
  • 80's chicks are the hottest!
Re: torque converter or tranny?
« Reply #12 on: November 05, 2011, 02:58:30 AM »
If you do rebuild I would love to see pictures...I got my transmission sitting on an oil drum in my garage with exactly the same issue.
AMC, serving up heaping helpings of AWESOME since 1954

Offline AMCKen

  • Eagle Limited
  • *****
  • Posts: 556
  • Thumbs Up 13
    • American Motors Club of Alberta
Re: torque converter or tranny?
« Reply #13 on: November 05, 2011, 03:23:07 AM »
Also check that the linkage between the transmission and the throttle is set up correctly. A mis-adjusted kick
down can cause weird problems.
39Master85w.partscar,67Marlin343,68AMX343,70Machine,73Matador2drht401,
73-74-75-76GremlinXs,75PacerX,76Hornet2dsd,76-77Matadorcpes,
2-77AMXs304,78AMX304,78GremlinGT,78Concordsw,79Concordhb,79PacerDL304,
2-79AMXs304/401,2-80AMXs258/401,80SpiritDL304, 80Eagle4dsdn,3-81SX4s,
81SpiritGT,2-81Concord4dsd,82Eaglesw,2-85Eaglesw,2-80J20/360,85J10/258,2-88Eaglesw,
94Sentra2dsd   (42)

Offline DaemonForce

  • Grease Magnet
  • Eagle Limited
  • *****
  • Posts: 525
  • Thumbs Up 8
Re: torque converter or tranny?
« Reply #14 on: November 05, 2011, 04:13:22 AM »
It's not the kickdown linkage. It's a fault within the transmission itself. What he's experiencing is a normal shift from 1st to 2nd and it shifts into 3rd making you believe that this would be the kickdown linkage at fault. If this were the case, it wouldn't shift out of 2nd. Problem is, instead of going into 3rd it behaves as if it went straight into neutral and keeps this behavior until the vehicle slows enough to where it kicks down to 2nd again. This is clearly a fault somewhere between the torque converter and tail housing. I suspect the front clutches to be burned out but it's also possible that there are other faults as well. An overhaul will tell.

I suggest very thorough examination. Deep cavity search. Assume nothing. 8)
1983 Limited
AMC 258C {R2:27.Jun.13}
Carter 2681 {R2:28.Oct.12}
TorqueFlite A998 {R6: -20.Apr.12}
NP129 {R2:28.Apr.12}
M35-273 {???}
Compression: 0
Corrected Idle: 0RPM

Rebuild:
???

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #15 on: November 06, 2011, 12:09:56 AM »
Either the high forward clutches burned out or if they are still good, the drum seal popped. I used to replace those seals for trans shops that didn't have the tool back in the day.
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline eaglebeek

  • Eagle Sundaancer
  • ******
  • Posts: 889
  • Thumbs Up 70
Re: torque converter or tranny?
« Reply #16 on: November 11, 2011, 11:19:35 PM »
Something that hasn't been asked yet...does SleepsUnderCar's Concord have a Chrysler transmission? Everything I have on TorqueFlites says if the transmission slips in 3rd it's likely it's going to slip in reverse also. The rear clutch is applied in all forward ranges, so I think it's OK. SleepsUnderCars says reverse is fine, but the front clutch is applied (with the rear band) in reverse and 3rd (with the rear clutch). So now I'm confused and left to wondering if we're even talking about a TorqueFlite. ??? :eagle:
1984 Eagle Wagon, 258, auto, 2.73 gears, daily driver
1983 Eagle Limited Wagon, parts; sold
2000 Jeep Cherokee, 4.0, auto
2007 Hyundai Accent, radical downsize from minivan, wife's car and she loves it!

"The society which scorns excellence in plumbing as a humble activity and tolerates shoddiness in philosophy because it is an exalted activity will have neither good plumbing nor good philosophy: neither its pipes nor its theories will hold water."--John W. Gardner, in "Excellence: Can We Be Equal and Excellent Too?" (1961)
 
Air-conditioning is so cool!

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #17 on: November 11, 2011, 11:35:55 PM »
The high forward clutches are engaged in drive (3rd only) and reverse. First gear can still work with bad rear clutches because of the one way sprague which takes the load off them, but it doesn't work in reverse so reverse wouldn't work if they were bad.
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #18 on: November 12, 2011, 04:51:47 AM »
yes, it is a Chrysler 904.
i have done some reading up on this, the best article i found seems to point to the front clutch pack. the one thats only applied in 3rd and reverse. yes, reverse works...for now. what i have read says i can expect that to go out soon. i am probably just going to park the car until spring, i found a cheap winter beater to use for my commute to work now.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #19 on: November 12, 2011, 10:23:03 AM »
It is possible there is a clog in the valvebody keeping it from going into drive. . If the passing gear valve was jammed, it would rev fairly high before going into second from first.

PS: It's a 998 (related to 904, but with bigger rear band) and probably a lockup
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline AMCKen

  • Eagle Limited
  • *****
  • Posts: 556
  • Thumbs Up 13
    • American Motors Club of Alberta
Re: torque converter or tranny?
« Reply #20 on: November 14, 2011, 06:13:54 PM »
If it's a Spirit, (as mentioned in the first post), it IS most likely a 904. : )
39Master85w.partscar,67Marlin343,68AMX343,70Machine,73Matador2drht401,
73-74-75-76GremlinXs,75PacerX,76Hornet2dsd,76-77Matadorcpes,
2-77AMXs304,78AMX304,78GremlinGT,78Concordsw,79Concordhb,79PacerDL304,
2-79AMXs304/401,2-80AMXs258/401,80SpiritDL304, 80Eagle4dsdn,3-81SX4s,
81SpiritGT,2-81Concord4dsd,82Eaglesw,2-85Eaglesw,2-80J20/360,85J10/258,2-88Eaglesw,
94Sentra2dsd   (42)

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #21 on: November 15, 2011, 11:25:49 AM »
Sorry, but no. 904 wasn't used after '79 on the 6 cyls. They were snapping rear bands before warranty was up.

<----PS: Ex-Mopar trans tech, back when Hemis were still available.
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: torque converter or tranny?
« Reply #22 on: November 15, 2011, 06:46:02 PM »
Sorry, but no. 904 wasn't used after '79 on the 6 cyls. They were snapping rear bands before warranty was up.

<----PS: Ex-Mopar trans tech, back when Hemis were still available.

According to my service manual, 1981 6 cylinder Spirits/Concords came with 904s.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: torque converter or tranny?
« Reply #23 on: November 16, 2011, 07:50:44 PM »
Since they look the same to most casual observers, it's not a biggie. The case has a couple ribs where the wider rear band lives inside to tell them apart.
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: torque converter or tranny?
« Reply #24 on: November 18, 2011, 11:06:59 AM »
it's a 1980 spirit ith an Iron Duke. 904.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline AMCKen

  • Eagle Limited
  • *****
  • Posts: 556
  • Thumbs Up 13
    • American Motors Club of Alberta
Re: torque converter or tranny?
« Reply #25 on: November 19, 2011, 05:54:05 PM »
http://s143.photobucket.com/albums/r122/AMCKenA/?action=view&current=998A.jpg

Shows a 998 out of an Eagle. The 2 ribs on the side aren't on a 904.
39Master85w.partscar,67Marlin343,68AMX343,70Machine,73Matador2drht401,
73-74-75-76GremlinXs,75PacerX,76Hornet2dsd,76-77Matadorcpes,
2-77AMXs304,78AMX304,78GremlinGT,78Concordsw,79Concordhb,79PacerDL304,
2-79AMXs304/401,2-80AMXs258/401,80SpiritDL304, 80Eagle4dsdn,3-81SX4s,
81SpiritGT,2-81Concord4dsd,82Eaglesw,2-85Eaglesw,2-80J20/360,85J10/258,2-88Eaglesw,
94Sentra2dsd   (42)

 

SMF spam blocked by CleanTalk