News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • November 21, 2024, 11:40:20 AM

Login with username, password and session length

Author Topic: Rear vavle cover vent plug  (Read 3158 times)

0 Members and 1 Guest are viewing this topic.

Offline Beaverseagle

  • Eagle
  • **
  • Posts: 107
  • Thumbs Up 8
Rear vavle cover vent plug
« on: December 20, 2015, 01:28:16 PM »
Hello All,

I just finished upgrading to an aluminum valve cover. Is there anything wrong with plugging the rear vent of the valve cover or does it need to be remain open? I don't want to create any leaks in the new gasket and cover.
82 SX4 258 w/ 2 inch lift 235 tires and TBI kit.

Online amcfool1

  • Eagle Limited
  • *****
  • Posts: 655
  • Thumbs Up 31
Re: Rear vavle cover vent plug
« Reply #1 on: December 20, 2015, 03:57:18 PM »
hi, you need to run a line from that rear hole to your air cleaner breather filter, like stock. Do NOT plug that hole, it's how your engine breathes, along with the PCV in front. good luck, gz

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: Rear vavle cover vent plug
« Reply #2 on: December 20, 2015, 06:52:03 PM »
One hole is fresh air in and the other is blowby out.  https://www.youtube.com/watch?v=EPIfI9aZHt4
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3451
  • Thumbs Up 89
  • Near Seattle
    • Virtual Jeep
Re: Rear vavle cover vent plug
« Reply #3 on: January 06, 2016, 01:53:40 AM »
PCV takes the dirty air out and the other port lets fresh air in (unless you go EFI, then the PCV port becomes a CCV) If you only have one, you will either overpower the PCV and oil will be forced out the gaskets and/or blow the rear main seal or there will be too much suction and oil will be sucked out past the rings.
« Last Edit: January 06, 2016, 01:54:39 AM by carnuck »
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

 

SMF spam blocked by CleanTalk