Didn't see this thread before I commented on your other one.
He may have used Dexcool in the system before the green coolant was put in. That could have been the cause of his engine and coolant problems before, and he may not have learned the first time. If you don't know about Dexcool, it was made by GM and had a class action lawsuit because it would gel up in the system and cause MAJOR engine and cooling problems. Coolant could've been replaced later with green 50/50 (which SHOULD be used). I highly doubt it would be due to Chinese parts. They get a bad rap, but they are generally decent quality in my eyes. Most of today's parts and cars come from overseas anyway, so I couldn't see that being the problem.
Keep in mind: low cost of labor doesn't necessarily mean low quality parts. Some overseas workers (not all, good example: Apple workers) make more money at the factories than they would anywhere else. Therefore, they take more pride in their work than you would think. If all the parts still came from the U.S., we would be complaining about ridiculously high prices to compensate for labor costs. It's simply a trade-off.
The PO may have also used just plain cheap parts in the rebuild, or he could've used stop leak to fix a radiator problem (which is meant to gel up, and can cause similar problems). You ought to install a 195 degree thermostat at the very least if you haven't yet, and thoroughly check anything you don't replace. Maybe even run some powerful cleaner through, and then flush the system. If you end up replacing the radiator, go with a $200 3-core aluminum one for a CJ-7 on the auction 'bay. All that's required is to drill new mounting holes a couple inches higher, but it will be well worth it. At that time, a $50 external transmission cooler will be a good investment if you have an automatic.