Author Topic: SX/4 Under-dash tray isn't secure (Read 3288 times)

macdude443 · « **on:** September 05, 2011, 12:05:20 AM »

How does one mount the long tray that runs under the dash? I see two holes on either end that would mount to the side of the vehicle in front of the doors, but no screws will thread. Are these jackson-style screws or something else? Are there some sort of threaded clips that must be installed behind the trim that I may be missing? Thanks!

mudkicker715 · « **Reply #1 on:** September 05, 2011, 06:53:26 AM »

Most likely your holes on the trim not alligned to the holes onthe body.

macdude443 · « **Reply #2 on:** September 05, 2011, 08:02:40 AM »

I'll double check. I didn't have a flashlight when I tackled that.

Jurjen · « **Reply #3 on:** September 05, 2011, 08:39:36 AM »

And 2x2 more holes a feet or so off-centre.
They are self tapping screws, with a hex head.

IowaEagle · « **Reply #4 on:** September 05, 2011, 12:22:38 PM »

priya · « **Reply #5 on:** September 05, 2011, 12:48:10 PM »

Thanks for the diagram Doug. I have a package tray to install that came with no hardware, now I have a better idea of how to mount it.

IowaEagle · « **Reply #6 on:** September 05, 2011, 01:26:55 PM »

You are welcome. That is what is so helpful about the parts books in the Eaglepedia.

Author Topic: SX/4 Under-dash tray isn't secure (Read 3288 times)

macdude443

SX/4 Under-dash tray isn't secure

mudkicker715

Re: SX/4 Under-dash tray isn't secure

macdude443

Re: SX/4 Under-dash tray isn't secure

Jurjen

Re: SX/4 Under-dash tray isn't secure

IowaEagle

Re: SX/4 Under-dash tray isn't secure

priya

Re: SX/4 Under-dash tray isn't secure

IowaEagle

Re: SX/4 Under-dash tray isn't secure