AMC Eagle Den Forum

The Mighty 258 => Cooling System => Topic started by: 89 MJ on May 03, 2024, 12:55:31 PM

Title: Correct Temp Sensor for Gauge
Post by: 89 MJ on May 03, 2024, 12:55:31 PM

I need to replace the coolant temp sensor in my Eagle. I see that they’re are two options. The first is the Standard Motor Products TX27 with a plug on it.
The other is the Standard Motor Products TS219. This one has a bolt on the top.

Which one do I need to make my gauge read correctly? I would replace both, but I am not using the stock ignition or carb, so I shouldn’t need the one that communicates with the ECU.

Title: Re: Correct Temp Sensor for Gauge
Post by: AMC of Houston on May 03, 2024, 01:06:35 PM

The correct one is the TS219.   The AMC part number is J3233831 if you want to double-check the interchange.

Title: Re: Correct Temp Sensor for Gauge
Post by: 89 MJ on May 03, 2024, 01:40:23 PM

Quote from: AMC of Houston on May 03, 2024, 01:06:35 PM

The correct one is the TS219.   The AMC part number is J3233831 if you want to double-check the interchange.

Thank you, that’s the one I figured it was. I would’ve looked at the ones on my car, but it’s 1700 miles away haha