Text only | Text with Images

AMC Eagle Den Forum

Information and News => Hatchlings => Topic started by: Evenprime on February 15, 2024, 04:41:05 PM

Title: Going to rebuild brake system - what parts are hard to find?
Post by: Evenprime on February 15, 2024, 04:41:05 PM
Good day everyone.

Since I will be getting all new brake lines installed as well as new rotors, brakes etc, I figured Id replace the brake booster and master cylinder.

Are these readily available?

I can find things online but I know from looking at bushings that a lot of the times the things don't fit properly so trying to get a plan of attack before I start.

Thanks in advance.

Even
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: MIPS on February 15, 2024, 05:24:08 PM
Rotors, pads, drums and the rubber boot/slide bolt hardware kits for the calibers are still available. I was able to buy all of them off the shelf at my local Lordco auto parts store.
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: amcfool1 on February 15, 2024, 11:38:43 PM
hi, master cylinders are readily available. boosters are as well but harder to find. If you decide to get a booster, try to get a booster/master cylinder ASSEMBLY, otherwise you will have to adjust pushrod length yourself. I got one about 7 years ago from Autozone. Don't know if still available, but if your booster ain't broke, why fix it?  good luck,  gz
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: 89 MJ on February 16, 2024, 01:58:22 PM
I have not been able to find a source for boosters that have a quick turn around. Most of the boosters are rebuild services that cost a few hundred dollars. Everything else seems to be easy to find.
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: Evenprime on February 17, 2024, 02:12:17 PM
I'd like to have this vehicle set as a daily driver and would feel very comfortable knowing the entire brake system was new or at least rebuilt.

I will most likely have a professional run the new gas and brake lines, but figured I can probably replace the brake booster and master cylinder myself.

I didn't think about that push rod adjustment. Is it a difficult process or just a timing thing?
I've researched this stuff years ago and remember thinking I could probably tackle it but will definitely need to brush up.

Thanks in advanced.
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: rmick on February 17, 2024, 04:36:12 PM
Another option is to do hydro boost http://forums.amceaglesden.com/index.php?topic=43869.msg353694#msg353694
Title: Re: Going to rebuild brake system - what parts are hard to find?
Post by: Evenprime on February 18, 2024, 12:43:02 PM
Quote from: rmick on February 17, 2024, 04:36:12 PM
Another option is to do hydro boost http://forums.amceaglesden.com/index.php?topic=43869.msg353694#msg353694

Now that is an interesting idea I never considered before!!!!!
looks like a great idea.

Thanks for sending me down another rabbit hole!!!! hehe

Text only | Text with Images