Good morning! Just getting started on this rehab project of my grandmother's 1986 Eagle. The mice have had a field day in the engine compartment eating all the wiring! Looking at old schematics it looks as if there is a "master wiring harness" heading out to all the parts of the motor (possible part number J3242 910 and J3242 466) is there an aftermarket replacement that works for this or should I start scouring junk yards?
I don't know if anyone offers a master wiring harness. You might want to check with the AMC specific vendors like Kennedy American and AMCLives.
Good luck!
I can probably assist you in finding most of an '87 harness set up to the firewall plug but you would have to wait until april/may when the ground thaws. You will probably need to rescue a few plug ends from the old harness.
Thank you so much! I, too, won't get to this project until warmer weather, but if you have a decent harness you can salvage I would be VERY interested!