Hi All --
I'm having a bit of trouble interpreting the service manual's flatness specification for cylinder heads (6 cyl). Can you all please take a look at the attached image and let me know your opinions?
0.001", 0.002" or somehow up to 0.006" or 0.008"? It's a very curious way of explaining the allowable variation, unless they're talking about a side-to-side or end-to-end situation.
Thanks in advance!
David
My manual 72 for 258 says .008 for full length of head .002 in 6 inch or .001 in 1 inch which is the same as what the 1980 manual says. Just printed differently. 0.001/1.0in .002/6in .008 fuel length
Quote from: rmick on April 18, 2022, 11:21:42 PM
My manual 72 for 258 says .008 for full length of head .002 in 6 inch or .001 in 1 inch which is the same as what the 1980 manual says. Just printed differently. 0.001/1.0in .002/6in .008 fuel length
Thank you, that definitely clarifies! Much-appreciated!
David