Print Page - Engine ground locations?

Title: Engine ground locations?
Post by: Ace2600 on March 18, 2019, 09:29:56 AM

Ive been starting work on the eagle, and recently installed the Gronk, "Nuttered" it. But my starter drag has continued. Im convinced I just need to add more grounds, The only one I know is connected is the immediate one from the negative battery terminal to the Block. Where else should I look? And where can I add one?

Title: Re: Engine ground locations?
Post by: DAVE on March 19, 2019, 10:25:38 AM

there should be one from the engine to the firewall also one from the engine to the motor mount on the right side

Title: Re: Engine ground locations?
Post by: Ace2600 on March 19, 2019, 02:10:41 PM

Quote from: DAVE on March 19, 2019, 10:25:38 AM
there should be one from the engine to the firewall also one from the engine to the motor mount on the right side

Thanks Dave! A little busy after school today, But as soon as I get them on ill post and update y'all!

Title: Re: Engine ground locations?
Post by: AMC of Houston on March 19, 2019, 07:07:39 PM

And check the ground cables that are there for resistance. Just because it looks OK doesn't mean its OK.

Title: Re: Engine ground locations?
Post by: Ace2600 on March 20, 2019, 09:43:18 AM

Thanks for the feedback. Probably won't get out to the eagle until this weekend.

AMC Eagle Den Forum

The Mighty 258 => Engine Electrical Systems. => Topic started by: Ace2600 on March 18, 2019, 09:29:56 AM