AMC Eagle Den Forum

The Shop => Transmission Shop => Topic started by: 85AmCfreak on October 19, 2016, 12:56:46 PM

Title: Looking for a manual (standard shift) trans crossmember.
Post by: 85AmCfreak on October 19, 2016, 12:56:46 PM
Hey guys I'm looking for a manual (standard shift) transmission crossmember for our eagles. It's for my 83 sx4 with a 258. If anyone has one they are willing to sell I would appreciate it. Any leads will help.
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: 85AmCfreak on October 26, 2016, 01:16:16 PM
Bump
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: ChickenFarmer3 on March 04, 2017, 10:04:25 PM
Is the crossmember the same or is there really a difference between the 2?
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: amcfool1 on March 05, 2017, 12:13:39 AM
hi, same crossmember, different mounting holes/trans mount. hey, we talkin' AMC here! they didn't change a thing unless they absolutely HAD to! good luck, gz
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: mudkicker715 on March 05, 2017, 12:59:29 PM
They absolutely did change the crossmember from auto to manual. One does not work for the other. I swapped a auto setup to manual. I had pics somewhere. Cannot find now.
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: amcfool1 on March 05, 2017, 01:01:47 PM
ok, sorry! good luck, gz
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: mudkicker715 on March 06, 2017, 10:15:46 AM
Here is the different xmembers
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: ChickenFarmer3 on March 07, 2017, 04:07:02 PM
I take it the manual one is wider?   Is there another Jeep crossmember that would work?
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: mudkicker715 on March 07, 2017, 04:28:19 PM
Yup also sits at a different height.
Title: Re: Looking for a manual (standard shift) trans crossmember.
Post by: ChickenFarmer3 on March 07, 2017, 05:46:38 PM
I may have to have one fabricated.  Does anyone know the dimensions?