Hello All,
Okay so I upgraded to a TBI system. I completely ruined my kick down cable/rod bracket for the tranny kick down. Did I just screw myself? Am I going to ruin my trans without it?
Can i just set the kick down cable at wide open throttle and that it or is there more to it since I no longer have the stock system? Please advise.
Without it yes you will ruin your tranny.
However one of my eagles did not have it i suspect it was in the wot position. It lasted years that way with no problems.
Thanks for the info. That's good to know. Did you have a cable running to the rod or did it go all the way to the tranny? I guess I'll just manually shift through the gears to keep the pressure up in the tranny.
I suppose since the I am not using the stock pull down setup on the throttle body the bracket doesn't matter. I just need to some how make sure the valve moves at the same percentage as the throttle. Hmmmm
I would not drive it until it is fixed. Manually shifting will not prevent your tranny from destructing.
try a LOKAR cable system, good luck, gz