I'm using heater hose right now for the rear PVC outlet to the aircleaner. I can't seem to find anything less rigid. Would like to see if something else would be more flexible. What do you use?
Advance sells hose specific to PCV systems. I used this. I found it over near the PCV valves. I'll admit it makes a sharp bend, but it works. Two 90* fittings would make it better.
That strange, molded hose for the bowl vent is actually available 3rd party, but it's not cheap.
Quote from: macdude443 on January 08, 2016, 03:35:55 PM
Advance sells hose specific to PCV systems. I used this. I found it over near the PCV valves. I'll admit it makes a sharp bend, but it works. Two 90* fittings would make it better.
That strange, molded hose for the bowl vent is actually available 3rd party, but it's not cheap.
Do you know of a picture on Advance? I looked but there are quite a few.
http://m.advanceautoparts.com/mt/shop.advanceautoparts.com/p/autocraft-crankcase-ventilation-hose-ac1532p/5192463-P (http://m.advanceautoparts.com/mt/shop.advanceautoparts.com/p/autocraft-crankcase-ventilation-hose-ac1532p/5192463-P)
Ask for "crankcase ventilation hose". The link shows what I THINK I bought, not the exact size. Though it could be correct.