Text only | Text with Images

AMC Eagle Den Forum

The Mighty 258 => Exhaust System. => Topic started by: jpgreen on January 04, 2016, 09:36:55 PM

Title: exhaust donut gasket
Post by: jpgreen on January 04, 2016, 09:36:55 PM
Can't find a collector gasket or a part number for 88 258. Found 4cyl, concord, none for post 84 eagle. Any ideas anyone?
Title: Re: exhaust donut gasket
Post by: amcfool1 on January 05, 2016, 08:25:02 AM
don't think you need one, gz
Title: Re: exhaust donut gasket
Post by: 85AmCfreak on January 05, 2016, 08:26:42 AM
I agree I don't think the eagle used one.
Title: Re: exhaust donut gasket
Post by: carnuck on January 06, 2016, 03:22:02 AM
Not at the manifold to front pipe, but there is a rectangular one at the Cat inlet. Only the intake/exhaust manifold that is conjoined (gone by '82) had a donut and only 1/2 of them. The donut was built into the later cast iron models.
Title: Re: exhaust donut gasket
Post by: jpgreen on January 07, 2016, 12:10:57 AM
K... cause it doesn't look like there is one there,... and after three parts store idiots I thought I found one,... I really wish I had a better flashlight right now!
Title: Re: exhaust donut gasket
Post by: carnuck on January 07, 2016, 01:15:55 AM
If it's not running, put your hand down there!
Title: Re: exhaust donut gasket
Post by: jpgreen on January 07, 2016, 11:24:56 PM
No gasket. Metal on metal seal.
Title: Re: exhaust donut gasket
Post by: macdude443 on January 08, 2016, 04:26:26 PM
If you require one for the manifold to front pipe, I have a Victor Reinz donut around somewhere in the box I'll probably never use.  I would have bought it for an 82 SX/4.
Text only | Text with Images