Print Page - Starter solenoid hook up

Title: Starter solenoid hook up
Post by: uglywilly on March 09, 2014, 12:52:23 PM

I don't know if the PO hooked it up right, the car won't turn over. In my effort to track down the prob, can someone pleez post a pic of theirs, perhaps even labeling the wires? Mine is a 88, the closer the better.

Thanks in advance,
Brant

Title: Re: Starter solenoid hook up
Post by: IowaEagle on March 09, 2014, 07:16:23 PM

Is the neutral safety wire hooked up. It goes on that stud on the bottom of the solenoid.

Title: Re: Starter solenoid hook up
Post by: uglywilly on March 11, 2014, 07:43:06 PM

There is a wire hanging from that! Where does it go? :hello2:

Title: Re: Starter solenoid hook up
Post by: IowaEagle on March 11, 2014, 08:05:10 PM

A wire hanging from what? The starter solenoid of the NSS?

Title: Re: Starter solenoid hook up
Post by: carnuck on March 12, 2014, 04:53:10 PM

It depends which style of starter it has. Ford style has a fender mounted solenoid and the XJ style one is on the starter itself.

Title: Re: Starter solenoid hook up
Post by: doneagle on March 13, 2014, 08:11:36 AM

HI Brant take a look at the post that said I cant kill my engine..... there is your answer .hope this helps
...........don

AMC Eagle Den Forum

The Mighty 258 => Engine Electrical Systems. => Topic started by: uglywilly on March 09, 2014, 12:52:23 PM