When I took out the back seat, it almost fell out. I'm not sure how anything goes back together.. plus I'm putting in the divided rear seat, so I need to spot weld in the bracket. Can anybody snap a few pictures of the back seat in theirs? I'm mainly looking for a few photos of the latches above the wheel wells and the center bracket. The bottom seat cushion I think I can handle.
Posted a reply and then realized I didn't have a split seat.
Even if it's not split. The outside latches should be the same on both. I'll take any help I can get!
Just spotted this , I will see if I can do it for you.Mine is an 82 , and I usually leave the seats down 100% of the time so it is not a major problem.
Don't know if this is quite what you mean, but here are a couple from mine. There is a single bracket in the center for the split seats, and the side brackets go through holes in the wheel well trim.
(http://i1237.photobucket.com/albums/ff479/Baskinator/IMG_20130520_205816_308.jpg) (http://s1237.photobucket.com/user/Baskinator/media/IMG_20130520_205816_308.jpg.html)
(http://i1237.photobucket.com/albums/ff479/Baskinator/IMG_20130520_205835_953.jpg) (http://s1237.photobucket.com/user/Baskinator/media/IMG_20130520_205835_953.jpg.html)
(http://i1237.photobucket.com/albums/ff479/Baskinator/IMG_20130520_205843_583.jpg) (http://s1237.photobucket.com/user/Baskinator/media/IMG_20130520_205843_583.jpg.html)