Figured I would start a new thread since I have lots planned for my Wagon.
(http://i327.photobucket.com/albums/k444/xipil1/pinger_1196454138_zpsef337e67.jpg)
pick from before I picked it up
It needs a new Trans but untill I get the money for that I am taking care of some small stuff.
(http://i327.photobucket.com/albums/k444/xipil1/DSCN4460_zpsbdf31785.jpg)
Here are the AMC speaker grils I made.
And today I was taking the slop out of my steering column thanks to a post I found on here. :)
(http://i327.photobucket.com/albums/k444/xipil1/DSCN4470_zps642edebd.jpg)
(http://i327.photobucket.com/albums/k444/xipil1/DSCN4467_zps1cd79f7e.jpg)
I made this tool to compress the lockplate.
So now for a question...
(http://i327.photobucket.com/albums/k444/xipil1/DSCN4472_zps908fabbe.jpg)
What is this part? I couldn't find its home when reassembling the steering column. It all seems to work fine without it. ;)
(http://www.americanpartsdepot.com/images/n319%207622.jpg)
It's the switch for the key buzzer.
no its not the buzzer switch that juhap posted, that is in place. It is some kind of spring. I think it fell out of the left side when I was removing the column cover.
Nice speaker grill!
it could be part of the turn signal lever
Juhap and ammachine390 are right, but just off. It's the clip for the buzzer switch. You can see it in the steering diagram in the eaglepedia. I took a column apart and this part took me hours to find where it went!
http://www.amceaglenest.com/~iowaeagl/guide/index.php?title=Tilt_Column
Yes that is it :hello2: Thanks all
it is a clip that helps hould the buzzer switch up to make contact with the lock cylinder
(http://i327.photobucket.com/albums/k444/xipil1/DSC09078_zpsc3851469.jpg)
(http://i327.photobucket.com/albums/k444/xipil1/DSC09082_zps85ed3c3c.jpg)
Update...took a bit off the fenders and put on some nice BFG ATs
Lookin' good!
Looking at the first pic, you HAD bumper end caps front and rear............ Whered day go?
Just took them off while I was doing the fender work. I am going to hang on to them but if anybody wants the chrome fender trim let me know.
Just put new front springs and shocks on...now I need to lift the rear so I can see over the hood ;)