So I bought a one-wire HEI distributor and I'm looking for somewhere to grab the 12V from (key in ON position). I heard on every other year besides '82, this is simply the yellow wire that runs into the ICM. I no longer have the ICM, it was removed by the previous owner. The plugs are still there. Any ideas on where I can find the 12V I need on my year?
Also, the electric choke on the MC2100, does that get the same Key-On 12V supply?
Choke gets a different supply from a timer. You can test the plugs with the key in the on position, red to the lead and black to battery ground. Turn the key off and see which one loses power. I believe it was a red on my 82'. You can always run a new wire from the Solenoid.
Sounds easy enough. Now if I can only find the timer...
It's my understanding that the choke gets its 12v from the oil pressure switch after there is oil pressure. Then it will stay 12v until oil pressure is gone. There is a heater in the intake that runs of a relay that is switched on with oil pressure and then switched off with a sensor in the intake.
The 3 prong plug behind the oil filter housing has 12V (that's the feed to the choke and the oil light too unless you have a gauge)
Great, thanks!