Print Page - SX/4 Under-dash tray isn't secure

Title: SX/4 Under-dash tray isn't secure
Post by: macdude443 on September 05, 2011, 12:05:20 AM

How does one mount the long tray that runs under the dash? I see two holes on either end that would mount to the side of the vehicle in front of the doors, but no screws will thread. Are these jackson-style screws or something else? Are there some sort of threaded clips that must be installed behind the trim that I may be missing? Thanks!

Title: Re: SX/4 Under-dash tray isn't secure
Post by: mudkicker715 on September 05, 2011, 06:53:26 AM

Most likely your holes on the trim not alligned to the holes onthe body.

Title: Re: SX/4 Under-dash tray isn't secure
Post by: macdude443 on September 05, 2011, 08:02:40 AM

I'll double check. I didn't have a flashlight when I tackled that.

Title: Re: SX/4 Under-dash tray isn't secure
Post by: Jurjen on September 05, 2011, 08:39:36 AM

And 2x2 more holes a feet or so off-centre.
They are self tapping screws, with a hex head.

Title: Re: SX/4 Under-dash tray isn't secure
Post by: IowaEagle on September 05, 2011, 12:22:38 PM

(http://www.amceaglenest.com/%7Eiowaeagl/guide/images/0/03/84880195.jpg)

Title: Re: SX/4 Under-dash tray isn't secure
Post by: priya on September 05, 2011, 12:48:10 PM

Thanks for the diagram Doug. I have a package tray to install that came with no hardware, now I have a better idea of how to mount it.

Title: Re: SX/4 Under-dash tray isn't secure
Post by: IowaEagle on September 05, 2011, 01:26:55 PM

You are welcome. That is what is so helpful about the parts books in the Eaglepedia.

AMC Eagle Den Forum

The Shop => Inside Your Eagle => Topic started by: macdude443 on September 05, 2011, 12:05:20 AM