so i recently jacked up my eagle, everything went fine except for when i got it stuck the transmission took on a bunch of water.
i flushed it and its good to go now but i dont want it to happen again, so im wondering how it got full?
my best guess is, the pan gasket leaks, or the dipstick because i didnt see a breather,
is there a breather???
if so where????
any help would be appreciated
Yes, there is a vent for the pump. It is behind the torque converter. Jeep guys plug that hole and drill and tap a new hole on top, install a barbed fitting and attach a hose to it and run that high into the engine compartment. http://www.pirate4x4.com/forum/showthread.php?s=bb9247a4c53b7e0db5cf3a5181c8c9a3&t=586054&page=2
i figured as much i was just hoping it wasnt so i didnt have to drop the tranny but thanks for varifying it and for the idea to reroute it.
so i did that and put it back in and now the car wont go into gear.. you think theres anything i could have messed up by taking the pump out?