Print Page - selector has been moved alot

Title: selector has been moved alot
Post by: leeSmith on February 20, 2011, 05:53:17 AM

Over the years my select drive has been switched back and forth. Other drivers didn't know ther was a problem with my actuator. What are other issues now and can I take apart the rear actuator for a rebuild(seals,gasket)?

Title: Re: selector has been moved alot
Post by: Jurjen on February 20, 2011, 04:49:18 PM

As far as I know there are no rebuild kit for the actuator.
The actuator for the "Shift on the Fly" version is still available:

http://www.teamgrandwagoneer.com/cgi-bin/partsSQL/search.cgi?query=vacuum&catid=

This means that you will need to lock the front (CV=shaft) actuator in locked position.

Title: Re: selector has been moved alot
Post by: leeSmith on February 23, 2011, 08:08:50 AM

thank you, please explain if you mean manually or just using the air switch which I think the front one is fine.

Title: Re: selector has been moved alot
Post by: leeSmith on February 23, 2011, 08:18:57 AM

And, please allow me to have info as to where I may purchase the fly shifter for my '84 wagon

Title: Re: selector has been moved alot
Post by: IowaEagle on February 23, 2011, 04:44:04 PM

IIRC the Grand Wagoneer site used to have them.

AMC Eagle Den Forum

The Shop => 4X4 and Driveline => Topic started by: leeSmith on February 20, 2011, 05:53:17 AM