AMC Eagle Den Forum
The Shop => Resources => Topic started by: Paul Revere on April 13, 2022, 05:53:49 PM
-
Would anyone with a front skid plate mind taking measurements for it. I found them on here at one point but I can't seem to again. Trying to get one fabricated since they are unobtanium.
-
Here is the parts box picture of it. It basically goes from skid rail to skid rail bolted to the rails with ubolts and bolts along the at edge http://amceaglesden.com/guide/Sections_39,_41_%26_42,_Skid_Plates,_Floor_Pans,_Dash_and_Cowel_Panels,_Front_Panels_and_Wheel_Housings
-
Thank you!!
-
I currently have my front skid removed from my 81 SW, auto. PM me and I can get you some numbers (in inches) if need be. Metres would involve a Small Fee!
-
Sweet pic, rmick! It's amazing, you can search for hours in the catacombs of the Den, but you'll never see every corner it seems. Now I want to make one too. Added to the list...
-
I currently have my front skid removed from my 81 SW, auto. PM me and I can get you some numbers (in inches) if need be. Metres would involve a Small Fee!
Found one from a nearby eagle owner that I was able to borrow and bring to a metal fabricator to copy, but thank you!