News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • October 14, 2024, 10:38:29 PM

Login with username, password and session length

Author Topic: Finding Transmission parts for AMC 121 (VW EA831)  (Read 2904 times)

0 Members and 1 Guest are viewing this topic.

Offline Blip Downshift

  • Eagle
  • **
  • Posts: 60
  • Thumbs Up 4
Finding Transmission parts for AMC 121 (VW EA831)
« on: February 12, 2019, 10:16:17 AM »
I am building a rally car out of a 1979 AMC Spirit with the VW/Audi EA831 engine.  The crux of it is that the car came with a wheeze-bag auto trans.  I've searched the internet high and low looking for the bellhousing which mated the EA831 to the BorgWarner HR1 trans.  The BW HR1 is also known as the FOG (Ford of Germany) or the Type E.  Finding a performance oriented trans is not a problem but I would like to find an original bellhousing.  The EA831 uses the Audi bolt pattern (same as the inline 5 cylinder) which is not the same as the VW EA827 (all modern water cooled VWs and Audis).  The VW EA831 was also used in the Porsche 924s but they implemented a transaxle configuration (bellhousing to torque tube to rear mounted transmission/differential).  These engines were also used in the VW LT28 and the Jeep DJ5G but the LT28, while available as an manual has a one piece bellhousing to trans and the DJ5Gs are all autos.  The pattern was also used in 5 cylinder Audis but they also only use one piece bellhousing/trans combinations.  I have the AMC 121 TSM supplement for the EA831 and it shows the bell housing as a separate piece.  So far the only solution is to buy a Quicktime bellhousing custom made to fit to a VW EA831 engine and a Ford/BW Type E trans but they are expensive.


There are no comments for this topic. Do you want to be the first?
 

SMF spam blocked by CleanTalk