The Shop > Transmission Shop

Transmission rebuild

(1/12) > >>

Alcology:
This is a teaser!

So I took out my transmission and am doing a rebuild with a parts kit.  I was impatient on getting it apart so I did not take any pics.  I will, however, be taking pics as I replace seals and thingies (technical term).  Hopefully this will create a good basis for a how-to so your 998 will no longer be that mystery metal tube underneath your eagle.  I also believe I found the reason why I lost 3rd gear; I found a snap ring out of place inside.  So far so good.  

IowaEagle:
Looking forward to it.

Jurjen:
Yup, and don't forget the thingies, there's lots of them.

Alcology:
Boy howdy, thingies galore.  I've just about finished with the rebuild and will be cleaning the case and putting it all back together.  A loose snap ring, a seal, some clutch plate wear, and band adjustments were the major culprits.  This really wasn't anywhere as bad as I thought it would be to do this and now I understand it that much better.  I have to sort out the pics and get writing. 

Whuntmore:
That's awesome... I can't wait to see your pics and read the write-up.

Navigation

[0] Message Index

[#] Next page