Would anyone with a front skid plate mind taking measurements for it. I found them on here at one point but I can't seem to again. Trying to get one fabricated since they are unobtanium.
Here is the parts box picture of it. It basically goes from skid rail to skid rail bolted to the rails with ubolts and bolts along the at edge http://amceaglesden.com/guide/Sections_39,_41_%26_42,_Skid_Plates,_Floor_Pans,_Dash_and_Cowel_Panels,_Front_Panels_and_Wheel_Housings
Thank you!!
I currently have my front skid removed from my 81 SW, auto. PM me and I can get you some numbers (in inches) if need be. Metres would involve a Small Fee!
Sweet pic, rmick! It's amazing, you can search for hours in the catacombs of the Den, but you'll never see every corner it seems. Now I want to make one too. Added to the list...
Quote from: 4x4jollyr on April 27, 2022, 06:45:56 AM
I currently have my front skid removed from my 81 SW, auto. PM me and I can get you some numbers (in inches) if need be. Metres would involve a Small Fee!
Found one from a nearby eagle owner that I was able to borrow and bring to a metal fabricator to copy, but thank you!