AMC Eagle Den Forum
1979 - 1983 AMC Spirits and 1978 - 1983 AMC Concords => Spirit/Concord Projects => Topic started by: Amc1320 on May 18, 2013, 08:18:36 PM
-
Ok, so most of the time we are looking for ways to RAISE our Eagles, but I actually want to lower my AMX, I think the front is probably about stock height and the rear springs have most likely sagged
But, rather than raise the back I would like to lower the fron to match, it sits too high in my opinion, epecially now, it has a kinda gasser look
heres some pics, any ideas??
(http://i1308.photobucket.com/albums/s614/Amc1320/0518131747_zpsf89c6542.jpg) (http://s1308.photobucket.com/user/Amc1320/media/0518131747_zpsf89c6542.jpg.html)
(http://i1308.photobucket.com/albums/s614/Amc1320/0518131748_zpsd26b0016.jpg) (http://s1308.photobucket.com/user/Amc1320/media/0518131748_zpsd26b0016.jpg.html)
(http://i1308.photobucket.com/albums/s614/Amc1320/0518131748a_zpsf345bbc0.jpg) (http://s1308.photobucket.com/user/Amc1320/media/0518131748a_zpsf345bbc0.jpg.html)
thanks for any input
Rob
-
I've heard of people trimming coil springs on other cars but I'm not sure I would recommend that. You might be able to order a set of springs that are shorter to begin with.
Great looking car!!!
-
Swap coils with someone that has a sagging 4 cyl Eagle (unless it's V8)
-
what size are the springs now? e.g.5x11, 5x12, etc. I did a similar swap on a Chevy Monza spyder. the front springs were 5x12, so I changed them to 5x11. did the same on the rear and also changed the spring rates to make it corner better. check out speedwaymotors.com they have a lot of different springs and spring rates to choose from. I hope this helps. LAZ
-
THanks for the tips and ideas! Im working on some stuff now, hopefully I can make it not seem like Im driving uphill all the time
Might even get better gas milage!!
Rob
-
Rob, I had an 83 Concord wagon and had the same issue and lowered the front to match the rear. I just cut some off of the front coil and it worked perfect. It's been over 20 years, so I can't remember how much I cut.
-
Read somewhere that swapping in Eagle Upper control arms will lower non Eagles.
-
And switching the other way around should lift the Eagle