News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • November 11, 2024, 10:56:27 AM

Login with username, password and session length

Author Topic: Strange Cold-start Behavior / '83 258 with Feedback BBD  (Read 1791 times)

0 Members and 3 Guests are viewing this topic.

Offline markindy

  • Premium Member
  • Hatchling
  • *****
  • Posts: 7
  • Thumbs Up 1
  • Indianapolis AMC Fan
Strange Cold-start Behavior / '83 258 with Feedback BBD
« on: October 23, 2024, 05:38:49 PM »
I'm trying to sort some cold-start issues.  When I bought the car it ran fine, but loped at hot idle and the electric choke didn't seem to function at all.  The original carb's barrels were carbon-black and the wire to the choke had been soldered-on.  I bought a cheap Chinese replacement carb as a stop-gap, and a rebuild kit for the Carter. 
The knock-off carb actually works great when the engine is warm, but cold-starts are still strange.  The electric choke and vacuum dashpot seem to work as they should, and the car starts wonderfully for about 1-2 seconds then shakes badly...like it's running on half the cylinders...but will smooth-out after a minute or two.  The connector for the feedback solenoid seemed flimsy, so I installed the original solenoid onto the new carb...but no change.  I'm not sure the feedback system has anything to do with this problem, but thought it was worth a try.  Again...once warm, everything is great.
Since the air-pulse system is useless due to rusted-off connections, I'm thinking about ditching most of the vacuum nonsense and going with a Carter that doesn't have a feedback solenoid.  This would at least preserve the PCV and EGR systems and make me only a mild eco-terrorist.  Anyone have other suggestions or things I should check?
1964 Rambler Ambassador 990 2-door hardtop
1978 Concord D/L 2-door sedan
1983 Eagle 30 / 4-door sedan

Online 89 MJ

  • Eagle
  • **
  • Posts: 137
  • Thumbs Up 16
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #1 on: October 23, 2024, 07:13:08 PM »
I think its worth rebuilding the original carb and see if that fixes it. It seems like with these cheap, Chinese knockoff carbs you either get a good one or a bad one out of the box and no amount of adjusting will fix it.
I suppose you could check for vacuum leaks using a can of brake clean around the base of the carb, but that's all I would try.
1986 Eagle: 258, Auto, Chrysler 8.25 rear, 3.54 gears
1989 Jeep Comanche: 4.0, AX-15, 8.8 rear, 4.10 gears
1940 Chevy PU: 350, 700R4

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 528
  • Thumbs Up 52
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #2 on: October 25, 2024, 10:05:30 PM »
Quote
The electric choke and vacuum dashpot seem to work as they should, and the car starts wonderfully for about 1-2 seconds then shakes badly...like it's running on half the cylinders...but will smooth-out after a minute or two.

I have basic emissions as well and mine does this too when it's exceptionally cold out. Put it down to the cylinders and manifold are cold, which is why the manifold has both the electric and coolant heating to get it warmed up as fast as possible.
A cold engine with the feedback requires the initial choke-pull-off to be set almost perfectly. The feedback system is disabled when the coolant and intake air temp is too low. The secondary air system not working will not affect any part of the feedback system. It's all downstream of every sensor in the system. One thing I found is that if the stepper motor isn't cleaned when the carb is rebuild it has the tendency to stick in colder weather. I follow Chrysler's old suggestion for cold starting and to do one pump to load the choke and set it on the fast idle cam, start it and leave it until all cylinders are firing before tapping the gas to unload the fast idle.

Quote
The connector for the feedback solenoid seemed flimsy, so I installed the original solenoid onto the new carb...but no change.
The clips that keep the harness snapped into the feedback stepper like to break off and the computer won't tell you when it's become unplugged. I use a stiff piece of solid core welding wire passed through the back of the connector and wrapped around the two bolts that hold the carb together to retain the connector in the socket.
« Last Edit: October 25, 2024, 10:15:28 PM by MIPS »

Offline Trooper

  • Eagle
  • **
  • Posts: 47
  • Thumbs Up 4
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #3 on: October 26, 2024, 01:32:21 PM »

Offline markindy

  • Premium Member
  • Hatchling
  • *****
  • Posts: 7
  • Thumbs Up 1
  • Indianapolis AMC Fan
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #4 on: November 03, 2024, 11:06:27 AM »
Thanks to everyone who provided suggestions for my problem.  As an update, now that the mornings are getting colder in Indiana, I checked the operation of the choke again.  I would swear on a stack of Bibles that the vacuum pull-off of the cheap replacement carb had been working, but when I checked again it wasn't.  The diaphragm is fine...I used a hand-held vacuum pump to pull it back and the choke plate didn't move at all.  I bent the linkage to get the specified 9/32" clearance and things were much better.  The engine, however, still coughs and sputters for 10-15 seconds before smoothing-out.  Maybe the EGR valve?  Again...once warm, everything is fine. 
I'm also not completely sure the choke thermostat is set correctly.  Every spec sheet says to set it one notch rich...but there is no marking on the choke housing.  Even the original choke thermostat had no indicator line.  How do yo know when the thermostat is correctly set?
1964 Rambler Ambassador 990 2-door hardtop
1978 Concord D/L 2-door sedan
1983 Eagle 30 / 4-door sedan

Offline MIPS

  • Eagle Limited
  • *****
  • Posts: 528
  • Thumbs Up 52
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #5 on: November 03, 2024, 01:17:57 PM »
Quote
Maybe the EGR valve?
If it's closed, it's closed. These are backpressure EGR's so if you take a vacuum pump to it it will just act like it's leaking. You gotta blow and hold pressure into the exhaust port of the EGR and apply vacuum for it to operate. On a cold Eagle there's at least two different vacuum switches that prevent it from operating until the coolant temp and the air cleaner temp is above threshold. If the EGR is opening on a cold fast idle you have a vacuum routing issue.

Quote
Every spec sheet says to set it one notch rich...but there is no marking on the choke housing.  Even the original choke thermostat had no indicator line.  How do yo know when the thermostat is correctly set?
I'm looking at my spare carbs and they both have a line scratched on them, but in slightly different locations. The aftermarket electric choke housings don't seem to have a mark or notch either.

Give me a few minutes to read the TSM and test the procedure on a carb and I'll get back to you.

Edited: Ah heck,  I just made it into a video you can work with.

https://www.youtube.com/watch?v=Rxv-SQCmIWo
« Last Edit: November 03, 2024, 03:46:27 PM by MIPS »

Offline markindy

  • Premium Member
  • Hatchling
  • *****
  • Posts: 7
  • Thumbs Up 1
  • Indianapolis AMC Fan
Re: Strange Cold-start Behavior / '83 258 with Feedback BBD
« Reply #6 on: November 03, 2024, 04:03:36 PM »
MIPS - Thanks so much for the link.  I did most of that, but finding the sweet-spot for the electric choke is definitely worth another look. 
1964 Rambler Ambassador 990 2-door hardtop
1978 Concord D/L 2-door sedan
1983 Eagle 30 / 4-door sedan

 

SMF spam blocked by CleanTalk