News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • October 15, 2024, 12:34:50 PM

Login with username, password and session length

Author Topic: 4.0L Swap, flex plate  (Read 1498 times)

0 Members and 1 Guest are viewing this topic.

Offline tgotr

  • Eagle
  • **
  • Posts: 25
  • Thumbs Up 1
  • Driving cars older than me since 2007
4.0L Swap, flex plate
« on: October 03, 2022, 03:02:25 PM »
I pulled my 258 and I'm doing a 4.0 swap...well it's been bored and I'm using my Eagle's stock Crank and rods, so it's going up to 4.7L.

I am reading Joshpit's write up, and while mine takes many deviations, it's been quite helpful. I do not have the engine assembled at the moment, and this could be answered by doing that.

Joshpit's write up says you need to use a 32RH OR a 42RE flexplate. Why can't I use my Eagle's stock flexplate off of the 258? There would be many advantages to using it, especially since it's in good shape for being 40 years old. I'm almost 40 myself, and I am in worse shape than that flex plate. I am assuming he recommended the 32RH and 42RE flex plates because he was still using the 4.0 Crank, and I will not be,


There are no comments for this topic. Do you want to be the first?
 

SMF spam blocked by CleanTalk