AMC Eagle Den Forum

Resource & Interchange Center => AMC Friendly Shops/Vendors => Topic started by: SpreadEagle on November 26, 2012, 11:20:06 AM

Title: I found rockers
Post by: SpreadEagle on November 26, 2012, 11:20:06 AM

Place is in Canada and has a lot of AMC parts listed, that included rocker panels for the 2 door Eagle. Site said 41 called and quoted me like 50 for them. Sounded friendly and I mentioned the nest and how we needed steel.
 http://www.showcars-bodyparts.com/amc.html

Check it out and maybe if we can express enough interest can get really good deal Hope I've placed this in the right spot an It's a useful vendor.

Title: Re: I found rockers
Post by: Amc1320 on April 19, 2014, 09:16:51 AM

I just bought rockers for the sx4 we are working on from rock auto , they only have a few left, maybe 4 or 5 of each side. They were 32 each but shipping was high since they are long and difficult to ship. But still not bad for a brand new part

Title: Re: I found rockers
Post by: Whuntmore on November 03, 2014, 09:31:49 PM

I had a place in Calgary make mine from Scratch.  It's the only place I could find locally.

Title: Re: I found rockers
Post by: drock87 on November 05, 2014, 02:33:49 PM

I'm about ready to either clean up what is left of my outer rockers, clean the inner rockers REAL well and fiberglass it. I can only imagine what I shop would charge to make and install new ones. I have zero welding experience, nor anywhere to try to do it. My inner rockers are actually in really good shape except the very most ends, but the outers are completely shot.