News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • December 05, 2022, 08:49:37 PM

Login with username, password and session length

Author Topic: T5 throw out bearing length  (Read 818 times)

0 Members and 1 Guest are viewing this topic.

Offline Vgrizzw

  • Eagle
  • **
  • Posts: 38
  • Thumbs Up 1
T5 throw out bearing length
« on: July 06, 2022, 05:45:03 PM »
Hello all,

A while back I completed a round of upgrades to my eagle that include an np242 and dana 35 w/ locker. I decided to do a new clutch while i was in there. However afterwards the clutch engages directly off the floor. Im wondering if i used a wrong length throw out bearing…
Slave cylinder is new. I have the wilwood master with a braided clutch line and a remote reservoir. And it was working fine before i decided to redo it. Ive also bleed the ever living out of it (also with the pump tool). Car has been in storage but im ready to fix this issue. It drives and operates correct other than being right on the floor. And guidance before i tear in would be nice. I.e does anyone have a known correct bearing they could measure for me to reference?

Thanks


There are no comments for this topic. Do you want to be the first?
 

SMF spam blocked by CleanTalk