AMC Eagle Den Forum

The Shop => 4X4 and Driveline => Topic started by: 86Woodgrain on September 29, 2019, 08:18:04 PM

Title: Speedo gear at trans case - seal??
Post by: 86Woodgrain on September 29, 2019, 08:18:04 PM

So it appears that the speedo gear spot in the transfer case is leaking pretty bad. Before I go taking it apart, what kind of seal is used to seal it? Is it a simple O-ring?

Title: Re: Speedo gear at trans case - seal??
Post by: 86Woodgrain on September 30, 2019, 01:13:06 PM

This diagram seems to indicate one O-ring - http://amceaglesden.com/guide/File:84880263.jpg I guess I'll have to get under there, clean it up and see what's up. I have a kit of like 400 O-rings so I guess I should be fine.

Title: Re: Speedo gear at trans case - seal??
Post by: mudkicker715 on September 30, 2019, 05:25:00 PM

It is an oring. Just pay attention to clock position, so to put it back in the same position.