News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • March 29, 2024, 06:26:49 AM

Login with username, password and session length

Author Topic: Hub Bearing Spacer - Eat the Bearing?  (Read 6147 times)

0 Members and 1 Guest are viewing this topic.

Offline Eagle Kammback

  • Kenosha Cadillac
  • AMC Eagles Den Addicted
  • ********
  • Posts: 2776
  • Thumbs Up 32
    • Car Crazy Central profile
Hub Bearing Spacer - Eat the Bearing?
« on: February 18, 2011, 09:00:57 PM »
I'm $250 in the hole because my bearing went bad, or so I think.
a spacer was forgotten when it was installed, the machine shop said that ate up the bearing.
however, my mechanic, who is the only one willing to work on my car in the county, doesn't believe forgetting an 1/8th inch spacer will do that.

SOmebody help me,
MMN2 Burnett
1983 AMC Eagle Wagon Project
1979 AMX that will probably never run
1993 Jeep Cherokee (Rest in peace)

Offline rollguy

  • Turbo Diesel Eagle
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1797
  • Thumbs Up 84
  • Southern California
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #1 on: February 18, 2011, 09:14:00 PM »
Sorry, but I agree with the machine shop.    1/8 inch is quite a bit of tolerance for the bearing.  Without the spacer, the side load on the bearing would destroy it in short order.  Without the spacer, the axle nut would squeeze the inner bearing race too tight in relation to the outer.  Sorry to hear about this problem.  It is a good thing we learn by our mistakes, but sometimes it is costly.
1980 Eagle Turbodiesel Wagon (only 2 known to exist as of 2008)- 7-7-2011 Flight to it's new nest @ Rambler Ranch
1983 Eagle Wagon  Tan over Copper
1982 Eagle SX4 "ALTREGL"  (avatar photo)
1982 Eagle 4 Door Sedan  Copper over Satin Black
1985 Eagle Sport Wagon October 2007 ROTM (SOLD)
4 Biofuel powered Benzs ('98 E300, '82 300 CD, '82 300 TD (wagon), '80 240 D)
1983 GMC Van (6.2 Diesel)
1985 Mitsubishi pickup (2.3 Turbodiesel)

Offline thereverendbill

  • AMC Eagles Den Addicted
  • ********
  • Posts: 2334
  • Thumbs Up 85
  • as seen on the internet
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #2 on: February 18, 2011, 09:31:27 PM »
If your mechanic admits to forgeting the spacer. What are they doing to fix the problem to continue to get you business?
1980 Eagle 2 door sedan (future solid axle swap)
1981 Eagle Kammback (restoration in progress)
1983 SX/4 SOLD
1983 Eagle Limited wagon  *For Sale* SOLD
1988 Jeep Comanche Pioneer (daily driver)
Click for YOUR TOWN, STATE Forecast" border="0" height="100" width="150

another amc forum
www.amcevolution.com

Offline doneagle

  • A.M.C. EAGLES ARE EXSITEMENT
  • Eagle Sundaancer
  • ******
  • Posts: 754
  • Thumbs Up 29
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #3 on: February 19, 2011, 08:45:23 AM »
HI  It sounds like your mechanic should pay for this .........Don
« Last Edit: March 19, 2011, 09:04:53 PM by teneagle »
HI.....A BAD DAY WITH YOUR EAGLE IS BETTER THAN A GOOD DAY AT WORK ...A GOOD DAY WITH YOUR EAGLE IS PRICELESS

There are Eagles lovers and there are the uneducated and the best we can do
with them is try to EDUCATED them on the virtues of the BEUTEFULL cars that we drive   ...................don

Offline IowaEagle

  • AMC Eagle Archivist
  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 31968
  • Thumbs Up 476
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #4 on: February 19, 2011, 08:56:31 AM »
Sounds like your mechanic should learn from this mistake.
Click for Toledo, IA Forecast" border="0" height="100" width="150   


Not a Jeep.  Not a Car.  Its an AMC Eagle!

1982 Eagle SX/4 Sport;
1980 Concord DL;
1970 Ambassador 2 Dr HT, SST
2002 Hyundai Santa Fe;
2008 Jeep Patriot Sport - Freedom Drive II

Offline Eagleearl

  • Eagle Sport
  • ****
  • Posts: 379
  • Thumbs Up 20
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #5 on: February 19, 2011, 12:15:54 PM »
The hub was designed with a few thousandths of clearance. If you leave out the 1/8" spacer the hub will never tighten up. The bearings were pressed on so it felt tight when it was put together but there was nothing to hold it tight so when the weight of the car and some driving forces were put on it, it got loose and chewed itself up quickly. Your mechanic is wrong. The spacer should have been pressed on too so whoever pressed it together is to blame.
« Last Edit: February 20, 2011, 10:01:03 PM by Eagleearl »

Offline EaglePilot

  • Eagle DL
  • ***
  • Posts: 156
  • Thumbs Up 11
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #6 on: February 19, 2011, 01:27:58 PM »
Sounds like your mechanic should learn from this mistake.

.....................and pay for it too!

Offline DGeagle

  • Eagle Sport
  • ****
  • Posts: 269
  • Thumbs Up 13
  • Forget the Whales, Save the Eagles!!!
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #7 on: February 19, 2011, 08:14:18 PM »
I had the exact same problem on my 86 with a bearing be left out.  Luckily, the whole hub was good in one of the parts cars and I grabbed it from there.  Myself and a mechanic have the dimensions to make a spacer if need be, because we thought that was our only option at the time, until we found the spare.
87 Eagle Sedan--86 Eagle Sedan--98 XJ 4.6 stroker--81 Concord--78 Pacer V-8--74 Gremlin V-8- 78 Concord AMX V-8--89 Grand Wagoneers--76 J-10--69,70,71 AMX--71,73 Javelin--70 Rebel Machine, 48 Packard, 47 Nash, Many other AMC's, Fords, and Mopars....
Too Many cars too little time!!

Offline Eagle Kammback

  • Kenosha Cadillac
  • AMC Eagles Den Addicted
  • ********
  • Posts: 2776
  • Thumbs Up 32
    • Car Crazy Central profile
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #8 on: February 20, 2011, 01:22:15 AM »
Awe crap. I was hoping he was right.
Though wouldn't that mean the wheel would have shaken when they first mounted it back on?
Would they have noticed there was more thread sticking out on the axle itself?

I'm in quite a predicament now
I should probably have a 3rd, unbiased mechanic confirm this stuff for me
MMN2 Burnett
1983 AMC Eagle Wagon Project
1979 AMX that will probably never run
1993 Jeep Cherokee (Rest in peace)

Offline rollguy

  • Turbo Diesel Eagle
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1797
  • Thumbs Up 84
  • Southern California
Re: Hub Bearing Spacer - Eat the Bearing?
« Reply #9 on: February 20, 2011, 03:16:23 PM »

I should probably have a 3rd, unbiased mechanic confirm this stuff for me
Is there such a thing out there?
1980 Eagle Turbodiesel Wagon (only 2 known to exist as of 2008)- 7-7-2011 Flight to it's new nest @ Rambler Ranch
1983 Eagle Wagon  Tan over Copper
1982 Eagle SX4 "ALTREGL"  (avatar photo)
1982 Eagle 4 Door Sedan  Copper over Satin Black
1985 Eagle Sport Wagon October 2007 ROTM (SOLD)
4 Biofuel powered Benzs ('98 E300, '82 300 CD, '82 300 TD (wagon), '80 240 D)
1983 GMC Van (6.2 Diesel)
1985 Mitsubishi pickup (2.3 Turbodiesel)

 

SMF spam blocked by CleanTalk