News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • March 29, 2024, 03:21:43 AM

Login with username, password and session length

Author Topic: Harmonic Balancer Cross-Referencing  (Read 2529 times)

0 Members and 1 Guest are viewing this topic.

Offline MIPS

  • Eagle Sport
  • ****
  • Posts: 450
  • Thumbs Up 44
Harmonic Balancer Cross-Referencing
« on: August 16, 2020, 02:22:28 AM »
My luck that after doing a top-end rebuild and timing chain my damper decides it wants to stop playing nice.

My local parts supplier come up with nothing for AMC's. Napa also had nothing. Chrysler/Mopar comes up with the J3237196 but it's $150. RockAuto also has nothing for AMC's but sleeve kits.
However it's the 258, so a CJ from 1982 should be(?) spec identical and sure enough it lists in stock the 102007 from ATP and 594739 from Ultra-Power/Dorman.
I purchased the Dorman special however I can't help but notice for both parts it states it's only compatible with the 1980 model Eagle and the Spirit, Concord and AMX up to 1980 as well. Is this an error or did something change after 1980?

Offline Canoe

  • Eagle Sundaancer
  • ******
  • Posts: 1150
  • Thumbs Up 54
Re: Harmonic Balancer Cross-Referencing
« Reply #1 on: August 16, 2020, 09:09:07 AM »
What year is yours?
Factory A/C?

From the Eaglepedia

Looks like three different parts...

79-83 parts catalogue
- 79/80: 3225201
- 81 except California: 3237196
- 81 California: 3237723
- 82/ without serpentine: 3237196
- 82/ with serpentine: 3237723



84-88 parts catalogue
- Less serpentine belt: J3237196
- With serpentine belt: J3237723



I did see a lot more links with searching '4.2 258' than just '258'.

Offline djm3452004

  • Eagle
  • **
  • Posts: 125
  • Thumbs Up 18
Re: Harmonic Balancer Cross-Referencing
« Reply #2 on: August 16, 2020, 10:03:16 AM »
My luck that after doing a top-end rebuild and timing chain my damper decides it wants to stop playing nice.

My local parts supplier come up with nothing for AMC's. Napa also had nothing. Chrysler/Mopar comes up with the J3237196 but it's $150. RockAuto also has nothing for AMC's but sleeve kits.
However it's the 258, so a CJ from 1982 should be(?) spec identical and sure enough it lists in stock the 102007 from ATP and 594739 from Ultra-Power/Dorman.
I purchased the Dorman special however I can't help but notice for both parts it states it's only compatible with the 1980 model Eagle and the Spirit, Concord and AMX up to 1980 as well. Is this an error or did something change after 1980?




I ended up using a "Dayco/Powerbond PB1440N" from RockAuto ($62) for my '83 Eagle.  It was an exact-fit replacement, though I do remember having the same issue of seeing nothing listed for a 1983 in RockAutos's catalog.  I just checked again and saw a cheaper comparable balancer to the PB1440N, an "Ultra-Power 594739" ($36) listed for the 1980 Eagle as well. 

Either of those should work for you if you're running V-belts.

Hope this helps!
David
Current Project: 1983 Eagle Wagon 258
Past AMC Project(s):  1979 Spirit Liftback 232
                                1968 Ambassador 287

Offline MIPS

  • Eagle Sport
  • ****
  • Posts: 450
  • Thumbs Up 44
Re: Harmonic Balancer Cross-Referencing
« Reply #3 on: August 16, 2020, 12:49:38 PM »
Sorry, I should of added it's V-belt with no air conditioning (and I hate it).
Okay, then it should be all okay. Thanks.

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 3002
  • Thumbs Up 167
Re: Harmonic Balancer Cross-Referencing
« Reply #4 on: August 16, 2020, 05:50:45 PM »
the crank balance changed for 81 and up. or something changed to make the balancer different.



Manitowoc WI

Offline Taylor

  • Administrator
  • Eagle Sundaancer
  • ******
  • Posts: 853
  • Thumbs Up 34
Re: Harmonic Balancer Cross-Referencing
« Reply #5 on: August 16, 2020, 06:24:26 PM »
I think the crank was changed from the early 4.2L cranks. That might be a reason for differing dampers. One has fewer or smaller counter weights. Making the crank itself quite a bit lighter.
https://www.quadratec.com/jeep-replacement-parts/jeep-engine/4.2l-engine.php
2010 Toyota Rav4 pack mule
1985 AMC Eagle Limited Wagon 🖖🏼🦅
2020 Honda Africa Twin the long haul trucker

Offline djm3452004

  • Eagle
  • **
  • Posts: 125
  • Thumbs Up 18
Re: Harmonic Balancer Cross-Referencing
« Reply #6 on: August 17, 2020, 01:15:15 PM »
I think the crank was changed from the early 4.2L cranks. That might be a reason for differing dampers. One has fewer or smaller counter weights. Making the crank itself quite a bit lighter.
https://www.quadratec.com/jeep-replacement-parts/jeep-engine/4.2l-engine.php


This is pretty confusing.  Even the year ranges for dampeners specified in the Quadratec link provided are "75-90" and "75-86".  That would appear to imply that the cranks and dampeners were common all through the relevant years where our cars were built.

All I know is that P/N I specified in my earlier message (listed by RockAuto to be valid for 1980 but not beyond) was an exact copy of the worn-out one I replaced on my '83, and in addition to installing the same as the old one, was the same in appearance and all major dimensions I could check with calipers.  I suppose that doesn't necessarily mean the dampener I removed was factory, but it certainly looked ancient.
Current Project: 1983 Eagle Wagon 258
Past AMC Project(s):  1979 Spirit Liftback 232
                                1968 Ambassador 287

Offline Taylor

  • Administrator
  • Eagle Sundaancer
  • ******
  • Posts: 853
  • Thumbs Up 34
Re: Harmonic Balancer Cross-Referencing
« Reply #7 on: August 17, 2020, 07:57:55 PM »
Oh it’s very confusing, one of these days I need to call them, just hadn’t plan to do it until some time this winter.
I am hoping it doesn’t get that confusing when I go to get time chain and gears. I want to replace those too.
« Last Edit: August 17, 2020, 08:00:30 PM by Taylor »
2010 Toyota Rav4 pack mule
1985 AMC Eagle Limited Wagon 🖖🏼🦅
2020 Honda Africa Twin the long haul trucker

Offline MIPS

  • Eagle Sport
  • ****
  • Posts: 450
  • Thumbs Up 44
Re: Harmonic Balancer Cross-Referencing
« Reply #8 on: August 20, 2020, 08:04:49 PM »
The Ultra-Power/Dorman 594739 came in today and from measurements:

-The new balancer weighs seven ounces more than the original
-The new balancer accessory pulley bolt holes are .04" further from the center (you will need to enlarge/oval your bolt holes to make the pulley fit.
-All other measurements are within .005" of eachother

 

SMF spam blocked by CleanTalk