Choose style:

Author Topic: Mysterious vacuum connection off manifold  (Read 805 times)

0 Members and 1 Guest are viewing this topic.

Offline Vgrizzw

  • Eagle
  • **
  • Posts: 33
  • Thumbs Up 0
Mysterious vacuum connection off manifold
« on: October 26, 2016, 04:15:49 PM »
I'm just trying to identify the vacuum line coming off the rear of the manifold. I can't find it shown on any diagrams and the end isn't hooked up so I just want to put it back where it goes.
Thanks

84' I-6 manual trans

It's coming off a 90 degree fitting in the rear most intake manifold runner. I tried to upload my pic buts its too large at the moment.
« Last Edit: October 27, 2016, 01:52:39 AM by Vgrizzw »

Online amcfool1

  • Premium Member
  • Eagle Limited
  • *****
  • Posts: 508
  • Thumbs Up 23
Re: Mysterious vacuum connection off manifold
« Reply #1 on: October 26, 2016, 11:40:41 PM »
hi, it is probably the feed for your axle/diff  disconnect switch/motors , good luck, gz

Offline Vgrizzw

  • Eagle
  • **
  • Posts: 33
  • Thumbs Up 0
Re: Mysterious vacuum connection off manifold
« Reply #2 on: October 27, 2016, 01:51:37 AM »
I figured it might be. The only other loose end was on the passenger side of the valve cover and it led to the underside of the car. That's where I finally chose to hook it up to but couldn't find any info to validate, but I'll stick with it for now. Thanks for your response.
« Last Edit: October 27, 2016, 08:23:44 AM by Vgrizzw »

Offline macdude443

  • Eagle Sport
  • ****
  • Posts: 463
  • Thumbs Up 24
Re: Mysterious vacuum connection off manifold
« Reply #3 on: October 27, 2016, 09:18:48 AM »
On my '86 I have a 90* fitting with two ports at the back of the intake.  One is for cruise control and the other runs to the HVAC control in the dash to switch the coolant valve on and off for the AC.
1982 Eagle SX/4
1986 Eagle Wagon

 

Page created in 0.067 seconds with 21 queries.