AMC Eagle Den Forum

The Mighty 258 => Emissions/Vacuum Systems => Topic started by: Pat on March 12, 2014, 01:16:51 PM

Title: EGR block-off plate
Post by: Pat on March 12, 2014, 01:16:51 PM
As BlackBird's been neutered before I got him & has a Holley instead of the original carb. does anybody offer a plate or is it something I need to have custom made? It is disconnected & not doing anything there, figured I'd just take it off since it's just sitting there.
Title: Re: EGR block-off plate
Post by: carnuck on March 12, 2014, 04:35:42 PM
I keep mine just in case I get a rotten tank of fuel. It's easy to hook up on the Holley still. As for a block off plate, most use a Chev fuel pump block off plate and mod the holes slightly.
Title: Re: EGR block-off plate
Post by: Pat on March 13, 2014, 09:22:31 AM
Thanks Carnuck, I figure I might as well take it off. It's not doing anything, hasn't for years. Was disconnected when I got BlackBird years ago & just sitting there. I'll try to get one of those & see how much modification needs to be done.
Title: Re: EGR block-off plate
Post by: Senor_taco on April 17, 2015, 02:41:40 PM
I know this is an old thread but I found this on eBay and bought one.
http://www.ebay.com/itm/161355956830?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I'll try it out and let you know if it works well or not.