Choose style:

Author Topic: 4x4 Shifters : Awesome DIY  (Read 884 times)

0 Members and 1 Guest are viewing this topic.

Offline Nightpath

  • Eagle Limited
  • *****
  • Posts: 672
  • Thumbs Up 16
4x4 Shifters : Awesome DIY
« on: April 17, 2015, 07:16:46 AM »
I was looking for a good shifter for my NP242, and since I'm cheap as heck I was looking for a DIY type solution. I came across these for anyone looking for an alternate shifter, and it looks pretty awesome.

It basically creates heavy duty direct linkage for the shifter instead of the small stock shifter rods. I'm going to look around and try to build one these weekend (or in the next few weeks). For what I estimate to be about $30, it looks like an amazing solution to the Novak shifters.

http://www.bsfab.net/?p=26

http://www.jeepforum.com/forum/f11/rebuilding-np-231-linkage-write-up-1497506/

(Novak cable shifter : http://www.novak-adapt.com/catalog/shifters/sk2xc.htm )
« Last Edit: April 17, 2015, 07:18:04 AM by Nightpath »

Offline ChickenFarmer3

  • Eagle
  • **
  • Posts: 61
  • Thumbs Up 2
  • Fly like an Eagle!!
Re: 4x4 Shifters : Awesome DIY
« Reply #1 on: February 27, 2017, 11:52:51 AM »
How did that work for you Nightpath?  Thanks for the links.  I am finishing up a NP231 right now!!

Offline amarshall

  • Eagle
  • **
  • Posts: 86
  • Thumbs Up 5
Re: 4x4 Shifters : Awesome DIY
« Reply #2 on: April 19, 2017, 05:29:16 PM »
I know this is an old thread, but I'd love to hear any feedback on a shifter solution also. 

I'm planning an NP242 upgrade, found this kit online:  http://www.boostwerksengineering.com/242-HD-Shift-Linkage-_p_27.html 

There is also a version for NP231's:  http://www.boostwerksengineering.com/231-HD-Shift-Linkage-Auto-Trans-_p_25.html

Both look roughly the same as the links that Nightpath posted.  For a bolt-in solution, I'd pay someone else to do the fab work. I have no affiliation with them, of course.
1988 Eagle Wagon - Overlander Build
Currently seeking:
  Seat cloth  for 1988, red/maroon/burgundy interior - just enough for patches

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 3862
  • Thumbs Up 193
Re: 4x4 Shifters : Awesome DIY
« Reply #3 on: April 19, 2017, 09:55:13 PM »
I would try to use the stock XJ shifter with one of those kits. I used the NP229 shifter only because I had previously installed it for the 229 I installed and while it worked, it wasn't the best solution.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline amarshall

  • Eagle
  • **
  • Posts: 86
  • Thumbs Up 5
Re: 4x4 Shifters : Awesome DIY
« Reply #4 on: April 19, 2017, 11:53:09 PM »
Good point Eaglefreek, that's what I was thinking too.  Hopefully it's possible to hack an XJ shifter into the trans hump roughly in line with the transfer case lever.  The kits look like they have a decent amount of adjustability.
1988 Eagle Wagon - Overlander Build
Currently seeking:
  Seat cloth  for 1988, red/maroon/burgundy interior - just enough for patches

Offline rmick

  • Eagle DL
  • ***
  • Posts: 150
  • Thumbs Up 11
Re: 4x4 Shifters : Awesome DIY
« Reply #5 on: April 25, 2017, 11:59:01 PM »
I adapted this for my 229 transfer case http://i.ebayimg.com/images/g/OCcAAOSwA3dYL6R6/s-l1600.jpg

IMG_0279 by rmick1, on Flickr
« Last Edit: April 26, 2017, 12:05:09 AM by rmick »
72 Javelin AMX
72 Javelin SST
72 Gremlin
81 SX 4

 

Page created in 0.044 seconds with 22 queries.