Choose style:

Author Topic: 715's 82 concord wagon  (Read 7158 times)

0 Members and 1 Guest are viewing this topic.

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 2280
  • Thumbs Up 158
Re: 715's 82 concord wagon
« Reply #15 on: September 08, 2011, 05:34:01 PM »
Got it thanks. Headliner looks good till u look at the wrinkles. My second one is the best. This is 6



Manitowoc WI

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 2280
  • Thumbs Up 158
Re: 715's 82 concord wagon
« Reply #16 on: February 28, 2014, 04:32:14 PM »
Time to blow fresh air into this monkey.

The other day my brakes became nearly nonexistant. And out here we are borrowing tempertare from a future date than add the wind. My heated garage is inaccessable dam nit.  anyway master is full brakes are on floor, but they stop the car it appears i can lock up the rear unnecessarilly. Pumping the brakes does not change this pedal at all. I hear nothing out of the ordinary opinions please as its so dam n cold i don't want to even get wood to reload the fire. Haha



Manitowoc WI

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 2280
  • Thumbs Up 158
Re: 715's 82 concord wagon
« Reply #17 on: March 08, 2014, 04:26:25 AM »
Master cylinder was replaced and the same thing with no front brakes.

i was able to force fluid back to the master cylinder. but i could not get it to go back to the calipers. replaced both of the calipers and i now have brakes. it also was above freezing so maybe somthing was obstructing flow in the distribution/proportioning block. the passenger side before it warmed up would not gravity drain.

so basically pixie dust and wooden shoes were found around the problem



Manitowoc WI

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 2280
  • Thumbs Up 158
Re: 715's 82 concord wagon
« Reply #18 on: October 02, 2014, 05:04:35 PM »
Recently my rear outer axle bearing turned to dust. I have a spare but  to get the hub off i had to torch the h e l l  out of it. Anyway what is the part number for the outer bearing seal. I most likely have it sitting around. Just  being lazy. So if someone has it that would be awesome. Saves me time as work is getting what time i can give.



Manitowoc WI

Offline carnuck

  • Having a 727 means never re-doing the trans again
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3435
  • Thumbs Up 87
  • Near Seattle
    • Virtual Jeep
Re: 715's 82 concord wagon
« Reply #19 on: October 03, 2014, 10:56:35 AM »
napa number 12582
AMC/Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental!

Offline mudkicker715

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 2280
  • Thumbs Up 158
Re: 715's 82 concord wagon
« Reply #20 on: October 06, 2014, 06:28:10 PM »
My connie is happy again. Time to use up the replcement bearing haha. Bring the next 200k on.



Manitowoc WI

 

Page created in 0.164 seconds with 21 queries.