News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • March 19, 2024, 03:03:55 AM

Login with username, password and session length

Author Topic: New Control Arm Bushings  (Read 16192 times)

0 Members and 1 Guest are viewing this topic.

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
New Control Arm Bushings
« on: March 18, 2011, 11:07:05 PM »
I bought a set of Prothane polyurethane control arm bushings.  They are the type where the old rubber bushing is burned out, then the new bushing is placed within the old metal sleeve.  I am also going to replace the sway bar endlinks, and I want to replace the sway bar bushings. Does anybody know what size the sway bar on a Concord is? The parts store lists two sizes, 13/16, and 7/8.  Any tips/warning on replacing these parts.  Thanks.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline Mavericke

  • Event/Meet Coordinator
  • AMC Eagles Den Addicted
  • ********
  • Posts: 3150
  • Thumbs Up 77
  • Midwest AMC Eagle Sanctuary Game Warden
Re: New Control Arm Bushings
« Reply #1 on: March 19, 2011, 06:12:36 PM »
I'll be watching your thread.. I'm about to do the same job on my Eagle.
Its got style... its got class...
It goes the extra mile... and still kicks @ss.
Strength. Intelligence. Beauty.
The AMC Eagle
-----------------------------------------------------------------------------
81' AMC Eagle Sx4 (My very first car, The Millennium Eagle)
82' AMC Eagle Sx4 Sport (Custom General Lee Style)
85' AMC Eagle Wagon Sport (My Daily Driver)
00' Jeep Grand Cherokee Laredo (The Grocery Getter)
And a plethora of other parts cars, and future restoration projects:
80 Wagon, 82 Spirit, Two 83 SX4s, 84 Wagon, 85 Wagon and more!!
-----------------------------------------------------------------------------

Offline thereverendbill

  • AMC Eagles Den Addicted
  • ********
  • Posts: 2334
  • Thumbs Up 85
  • as seen on the internet
Re: New Control Arm Bushings
« Reply #2 on: March 19, 2011, 06:51:51 PM »
what i would do is buy both and return the set that isn't right
1980 Eagle 2 door sedan (future solid axle swap)
1981 Eagle Kammback (restoration in progress)
1983 SX/4 SOLD
1983 Eagle Limited wagon  *For Sale* SOLD
1988 Jeep Comanche Pioneer (daily driver)
Click for YOUR TOWN, STATE Forecast" border="0" height="100" width="150

another amc forum
www.amcevolution.com

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #3 on: March 19, 2011, 07:53:29 PM »
I am pretty sure they are 13/16, just trying to make sure.  I forgot to add, I also plan on replacing the camber adjustment bolts that go on LCA. Napa lists a set on their website, has anyone ever tried these before?
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline ramblinfsj

  • Eagle Sport
  • ****
  • Posts: 279
  • Thumbs Up 32
Re: New Control Arm Bushings
« Reply #4 on: March 24, 2011, 05:56:50 PM »
The easiest way to find the diameter of your swaybar is to get a 13/16 and a 7/8 open end wrench. Whichever wrench slips onto the bar perfectly will tell you the size.

<img src="http://banners.wunderground.com/weathersticker/big2_both_cond/language/www/US/TX/Lubbock.gif" border=0
alt="Click for Lubbock, Texas Forecast" height=60 width=468>


AMC FOREVER                          
Lubbock, Tx                             
[email protected]

85 Grand Wagoneer
1965 AMC Rambler American 220
1962 AMC Rambler Classic 400
1979 AMC Spirit AMX
1974 DJ-5 Postal Jeep
1984 Jeep J-10
1979 AMC Concord DL 2dr

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: New Control Arm Bushings
« Reply #5 on: April 07, 2011, 09:02:32 PM »
I replaced all of the front end bushings etc. on my Kammback with the kit from ESPO.  They knew which sie to send. But use the previously posted wrench trick to be sure
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #6 on: April 07, 2011, 10:48:38 PM »
I did the wrench trick and have determined them to be 13/16. I haven't been able to do whole job yet though, hopefully sometime in the next few weeks.   

When you replaced your bushings, did you used the type where the the bushing is burned out, then the new bushing is set in the old sleeve?  How long did this job take? Was it necessary to actually remove the control arms, or just unbolt one control arm at a time? Were the bolts for the control arms easy to break loose? And how long did the whole job take? Sorry, that's a lot of questions.  Thanks
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline SleepsUnderCars

  • Eagle crazy
  • Eagle DL
  • ***
  • Posts: 208
  • Thumbs Up 62
  • the last truckload of Eagles ?
Re: New Control Arm Bushings
« Reply #7 on: April 07, 2011, 11:26:39 PM »
mine were burned out. We removed the control arms and did the burning on the workbench. It was very messy, burning molten ruber dripped everywhere. If you do it still partially attached please be careful.
the bolts were not bad but this was done at a shop runnin 175 psi
it's been awhile since it was done, but I don't think we spent more than a couple of hours?
I hope this helps.
'81 AMC EAGLE KAMMBACK rustbucket - off road only
'84 AMC EAGLE SEDAN
'68 Rambler Rogue 
'88 Dodge Ramcharger 
'07 Chrysler Pacifica (family hauler)
'80 AMC Spirit   ** FOR SALE **
'85 EAGLE WAGON sport   -bad frame future project

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #8 on: April 08, 2011, 01:27:25 AM »
mine were burned out. We removed the control arms and did the burning on the workbench. It was very messy, burning molten ruber dripped everywhere. If you do it still partially attached please be careful.
the bolts were not bad but this was done at a shop runnin 175 psi
it's been awhile since it was done, but I don't think we spent more than a couple of hours?
I hope this helps.
Excellent info, thanks a lot.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: New Control Arm Bushings
« Reply #9 on: April 08, 2011, 09:00:44 AM »
I vaguely remember doing this on a Mustang I owned years ago. If I remember correctly,  burning them out was so messy I used a drill to get most of the second one out and then used the torch. Use MAPP gas for better results if you are using a hand held torch.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #10 on: May 28, 2011, 01:06:49 AM »
Well, I finally got around to working on this.  I was pretty nervous about doing this job because of having to take out the spring, and burning out bushings so I was nervous about something going wrong.  Anyway the first step is to remove the shock, which is pretty straightforward. After that we used a spring compressor, the kind where there is 2 sets of hooks, and you try to position them across from each other on the spring. This compressor didn't work well for me, I couldn't get them directly across from each other, and I think they were too long for my car's springs, because every-time I tightened the screws, they would hit either the top of the fender or the control arm, depending on which way I put them in, up or down. I then tried a different kind of compressor and had the spring out within 10 minutes. The bolts that hold the upper control arm came out extremely easy, I had them both out within 5 minutes. Note: When you remove the upper control arm, the brake rotor/hub will want to pivot outward by the lower ball joint which will pull on the brake hose. To prevent damage to the brake hose, what I did was I held the rotor where I wanted and lowered it onto a small stool to hold it in the same spot.  The remove the bushings, we used an oxy-acetylene torch to heat them, a large c clamp, a big deep well socket, and smaller deep well socket using the c clamp to push small deep socket to push the bushing out, and the big deep socket, to catch the bushing. The bushings were very easy to come out, and I had them out with 5 minutes. I havn't finished everything yet, but I will continue to update this as I continue.

Heres the type of spring compressor I used.
[
« Last Edit: May 28, 2011, 01:11:37 AM by ammachine390 »
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: New Control Arm Bushings
« Reply #11 on: May 28, 2011, 09:55:30 AM »
I've never seen a spring compressor like that one. Does it have a brand name or model number on it?
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #12 on: May 28, 2011, 12:00:26 PM »
I am not sure, the compressor is at my school, so  I will look on Tuesday.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #13 on: July 12, 2011, 01:39:37 AM »
Sorry I had forgotten to update this earlier.

Eaglefreek, the brand name had worn off the spring compressor, so I do not know what kind it was. I am guessing it to be pretty old though as most of our school's tools are from the 70's. That, and it just looks old.

Anyway, I got all the bushings installed. Once the old ones were removed, I lubed them with the supplied "supergrease." They went into the control arms pretty easily, I used a C-clamp and some sockets. However, the bushings were too long and I could not reinstall the control arm back into position. So I used a grinder to take off a little bit and was able to get them in. I still have not driven the car yet, so I don't know how they perform yet, as I'm still working on the rest of the front suspension, but I will let everyone know what I think of them when I drive it.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

Offline HappyPappy

  • Eagle DL
  • ***
  • Posts: 205
  • Thumbs Up 5
Re: New Control Arm Bushings
« Reply #14 on: July 13, 2011, 03:44:58 PM »
I found it easier to make my own spring compressor. Take an old lower spring saddle and fab a long all thread to it, cut a top plate for it. I found that SEA thread works better then standard. Best thing to use is a U-bolt stock rod, weld it to the spring saddle with L H rods. The same compressor works on any of the front ends with the AMC spring set up.  DO NOT use the shock cross bar. I think I cut a plate to cover the hole in the spring saddle, been a few years  that I did that.

Offline BenM

  • AMC Eagles Den Addicted
  • ********
  • Posts: 1512
  • Thumbs Up 74
  • Pittsburgh, PA
Re: New Control Arm Bushings
« Reply #15 on: July 14, 2011, 11:17:55 AM »
I was just through spring compressors again myself. I'd heard good things about that type of external compressor, about them being safe.

I bought a used one at an online auction for $50 to do the Pacer, and I built my own for the Eagle in the style of the original AMC part. I chiseled the lower mount off a front shock and got the heaviest piece of all-thread that would fit the hole, then bolted it on and brazed it so it wouldn't turn. It installs from the top just like a shock and bolts in with the rubber mounts so it will wobble.

At the top I used some heavy steel bar and put some cut rubber hose to cushion it. Then I got the longest collar nut I could find and a wing nut. Just swap it out with the shock and snug it down, then tighten the wing nut so it doesn't back off while you work. The top and bottom mounts need to flex some as the angle changes.

It's hard to compress with just the all-thread, but it's quite safe for static loads while you're working on ball joints and such. Rolled all-thread would work much better if you can find it.

Very similar to HappyPappy's setup it sounds, but you can use your own spring saddle.
NSS#47184

1987 AMC Eagle Sedan -- 1976 Pacer Coupe -- 1968 Pontiac Tempest Custom S -- 1940 Mercury (& a 2002 Jetta Turbodiesel, 5 spd., the Wife's Daily Driver)

Offline ammachine390

  • Eagle Limited
  • *****
  • Posts: 722
  • Thumbs Up 42
Re: New Control Arm Bushings
« Reply #16 on: July 31, 2011, 01:25:53 AM »
I brought my car home a little over a week ago. The front end feels great. Feels very tight when going over bumps, unlike the rear end. However, I replaced almost everything in the front, so I'm not sure how much the control arm bushings did alone. But overall, I'm pretty happy. At highway speeds, the steering wheel still shakes a little, but I think its because my tires are not round, which I noticed when I had them on the balancer.
Dan
1981 AMC Concord DL 258 Auto

Click for Villa_Park, IL Forecast" border="0" height="100" width="150

 

SMF spam blocked by CleanTalk