News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.

Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.

  • May 23, 2024, 10:51:11 AM

Login with username, password and session length

Author Topic: RetroSound stereo install in 84 Eagle wagon  (Read 1254 times)

0 Members and 1 Guest are viewing this topic.

Offline cornut

  • Hatchling
  • *
  • Posts: 2
  • Thumbs Up 1
RetroSound stereo install in 84 Eagle wagon
« on: May 11, 2022, 01:47:19 PM »
We used the face for a 74-78 Mustang II. It required a little modification to both the the dash opening & the RetroSound faceplate. We hooked it up to a Jensen sub amp and a Jensen 2-channel. The doors were upgraded to some Kappa 6.5" coax. We had to modify the door panels a bit and made new ABS brackets to mount the speakers to but it worked out great. There's just enough clearance to allow the window handle to operate freely.
« Last Edit: May 11, 2022, 07:23:41 PM by cornut »

Offline vangremlin

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 4432
  • Thumbs Up 213
Re: RetroSound stereo install in 84 wagon
« Reply #1 on: May 11, 2022, 02:19:40 PM »
Very cool!  Do you have any pictures of the speaker mounts in the doors?  Thanks.
1981 Kammback 258 - "Pepe"
1980 Coupe 258 - "Ginger
1972 Gremlin X 304
1978 Gremlin 4 cyl 121 - sold
1964 TBird 390 - sold

Offline cornut

  • Hatchling
  • *
  • Posts: 2
  • Thumbs Up 1
Re: RetroSound stereo install in 84 wagon
« Reply #2 on: May 11, 2022, 07:07:45 PM »
What he did was trace the existing brackets and made them slightly oversized to cover the opening the factory mounts left. He used a heat gun to soften the ABS to form to the door. After that he used some PVC foam tape to make a good seal. I sent him this link in case he wants to undergo pulling the door panel to snap a pic. He enlarged the hole in the door panel to accept the larger speaker, the speaker grills cover that/rest on the door panel itself to hide the hole that was cut.

If he's up for taking the panel off, he's in the process of moving out of state so it might be a bit before he has time to show how they're mounted, we'll definitely get a pic of the speakers installed though. We live in different states but I was there over the weekend helping with the install.
« Last Edit: May 11, 2022, 07:12:47 PM by cornut »


SMF spam blocked by CleanTalk