The Shop > Electrical
Liftgate Solenoid Wiring?
(1/1)
Draekon:
I'm in the process of attempting to add a liftgate release solenoid to my SX4. I have the actual motor installed, but am a little unclear on the wiring. The TSM says that the current is fed to the motor through a contact assembly. I see the solenoid half of it, but am wondering what the other side of it is supposed to be like. Is it just a metal piece with a wire attached?
IowaEagle:
A brass looking strip on the motor side and a pin that makes contact with it on the lift gate.
Draekon:
Thanks! I'll have to try and fab something up along those lines. I have the pin, but no contact strip.
Navigation
[0] Message Index
Go to full version