The Mighty 258 > The Engine
Head bolts for the 4.0
maddog:
So I finally got my engine block and everything else back from the machine shop (they've only had it since September of 2020). I noticed one of the things I didn't get with it is head bolts, but I've also noticed that the ARP ones don't have the studs for the fuel rail or a few other things on top of the bolts. So I was wondering if anyone knows of a good source for head bolts that match the original ones but are stronger than the original ones, because the engine is being built as a stroker motor that's been bored 30 over.
rmick:
I used some felpro bolts I baught at auatozone on my stroker.
amcfool1:
hi, check out headbolts.com good luck, gz
maddog:
Thank you guys. rmick I've seen a lot of bad reviews from fairly recent for the felpro ones. And I'll check out that website gz.
maddog:
So I've been looking and I can only find head bolts for 97+ engines and mine is a 91. Would those actually work on my engine or is there a different thread pattern or something with the later model ones? Even the parts stores said they can't get them for my engine.
Navigation
[0] Message Index
[#] Next page
Go to full version