News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • March 28, 2024, 12:09:42 PM

Login with username, password and session length

Author Topic: 4.0L Head and EFI swap  (Read 19213 times)

0 Members and 1 Guest are viewing this topic.

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
4.0L Head and EFI swap
« on: August 25, 2011, 08:40:05 AM »
Recently pulled an old tired 4.2L out of the Eagle for a rebuild and thought, why not?  So here I am rebuilding it with a 4.0L camshaft and cylinder head and putting the EFI setup from a 1995 Jeep Grand Cherokee onto it.  I'll have more pictures and info as I go along.  I will hopefully have some great numbers afterwards too, planning to dyno it before I change to a Mega Squirt system and do any radical changes.  Little about my car, 85 wagon, it was a stock 4.2L with computer bypass, stock carburetor, TFI upgrade with 60k volt coil, ENVALVE, smog and vacuum gutted to my preference(4WD selector, EGR, and intake valves on the air cleaner), 3.53 gears, and 3spd. auto with lockup. I averaged around 16-17mpg and 19 highway.  Doing this as I lost compression in number 3 cylinder.

Offline Jurjen

  • AMC Eagles Den Addicted
  • ********
  • Posts: 3132
  • Thumbs Up 168
  • Dutch Eagle Preservation Front
Re: 4.0L Head and EFI swap
« Reply #1 on: August 25, 2011, 02:40:14 PM »
Good to have another 4.0 head project here.
Using the 4.0 camshaft is a good idea too.
Did you have the water sockets in the head welded up?
What are your plans for the exhaust manifold?
"sparrows fly in flocks, eagles fly alone"

Eagle Wagon Limited 1983, Citroen C-Crosser 2010, Triumph Bonneville 1969, Yamaha XJR1300 1999, Yamaha TX750 1973

https://www.youtube.com/watch?v=Tf0jpiW6tRI

Click for Leeuwarden, Netherlands Forecast" height="90" width="160

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #2 on: August 27, 2011, 04:46:46 PM »
I used JB Weld on the water jackets.  For now I am sticking with the stock 4.0L header and modifying the exhaust to route the right way.  Once I get the rings set and the engine broken in, I'm planning on switching to a Mega Squirt system, higher flow injectors, and putting a small Turbo on it to beef up the old girl and see what I can do without going too overboard.  Of course with the Turbo, I'll have to switch to an electric fan and probably a serpentine belt to keep it from slipping too much, but that is in the future.

Offline Jurjen

  • AMC Eagles Den Addicted
  • ********
  • Posts: 3132
  • Thumbs Up 168
  • Dutch Eagle Preservation Front
Re: 4.0L Head and EFI swap
« Reply #3 on: August 27, 2011, 05:46:28 PM »
I have electric fans, on a homemade frame:



"sparrows fly in flocks, eagles fly alone"

Eagle Wagon Limited 1983, Citroen C-Crosser 2010, Triumph Bonneville 1969, Yamaha XJR1300 1999, Yamaha TX750 1973

https://www.youtube.com/watch?v=Tf0jpiW6tRI

Click for Leeuwarden, Netherlands Forecast" height="90" width="160

Offline DaemonForce

  • Grease Magnet
  • Eagle Limited
  • *****
  • Posts: 525
  • Thumbs Up 8
Re: 4.0L Head and EFI swap
« Reply #4 on: August 27, 2011, 08:30:04 PM »
Woah that looks really nice. Are those tornado fans by any chance?

How does the whole thing sound when it runs? :o
1983 Limited
AMC 258C {R2:27.Jun.13}
Carter 2681 {R2:28.Oct.12}
TorqueFlite A998 {R6: -20.Apr.12}
NP129 {R2:28.Apr.12}
M35-273 {???}
Compression: 0
Corrected Idle: 0RPM

Rebuild:
???

Offline Jurjen

  • AMC Eagles Den Addicted
  • ********
  • Posts: 3132
  • Thumbs Up 168
  • Dutch Eagle Preservation Front
Re: 4.0L Head and EFI swap
« Reply #5 on: August 28, 2011, 03:44:10 PM »
No tornado fans, just some cheap fans from the evil bay, 80Watts 1250 CFM each.
They are still offered on the bay for about 15$ each.
I wanted to test if they had any influence on the fuel milage.
No measurable influence as far as I can say.
What I did notice is that they are never running, as long as you go faster than 15MPH they will never switch on because of engine temperature.
They are very quiet because of thet S-shaped blades.
"sparrows fly in flocks, eagles fly alone"

Eagle Wagon Limited 1983, Citroen C-Crosser 2010, Triumph Bonneville 1969, Yamaha XJR1300 1999, Yamaha TX750 1973

https://www.youtube.com/watch?v=Tf0jpiW6tRI

Click for Leeuwarden, Netherlands Forecast" height="90" width="160

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #6 on: August 29, 2011, 08:15:54 AM »
How much did that setup cost you? I might have to get some measurements from you ;)  Are those 3 solenoids by the battery what you wired in to control them?  I would probably wire them into my 4.0 harness and fuse block to get rid of that code and keep it at it's happiest temperature.

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #7 on: August 29, 2011, 12:00:52 PM »
I installed a dual fan setup from a Chrysler vehicle. It works great under normal circumstances however, when it's over 90 degrees or up inclines, it gets really hot. I also didn't notice any difference in MPG. Carguy, do you have any experience with Megasquirt?
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline Jurjen

  • AMC Eagles Den Addicted
  • ********
  • Posts: 3132
  • Thumbs Up 168
  • Dutch Eagle Preservation Front
Re: 4.0L Head and EFI swap
« Reply #8 on: August 29, 2011, 03:52:09 PM »
That set-up cost me about a $100. I have two relais switching the fans.
One relay is operated by the coolant temperature, the other by switching on the A/C.
The frame was made from left-overs from the company I work for.
It was intented as a temporary test, but since it functions very well, it stays in for the time being.
"sparrows fly in flocks, eagles fly alone"

Eagle Wagon Limited 1983, Citroen C-Crosser 2010, Triumph Bonneville 1969, Yamaha XJR1300 1999, Yamaha TX750 1973

https://www.youtube.com/watch?v=Tf0jpiW6tRI

Click for Leeuwarden, Netherlands Forecast" height="90" width="160

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #9 on: September 12, 2011, 08:29:11 AM »
Wow, it's been hectic here with my new job and the holiday weekend.  I finaly got some time to work on the car yesterday.  I managed to get the engine put together, painted, installed in the car, and most of the electrical installed.  I thinned out the harnesses quite a bit, but I got in a rush and couldn't thin down the harness going to the tranny and inside the vehicle yet, but what I did pull out gave me a lot more room.  For my CPS I welded up some angle iron to hold a piece of flatstock above a hole I cut into the transmission housing.  I will hopefully get a chance to run the plumbing and rest of my vacuum lines tomorrow as I finally have a day off.  I'll add updates and hopefully some pictures of the process in a couple days.

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #10 on: September 12, 2011, 11:26:45 AM »
So your using the factory computer first and then switching to Megasquirt later? The CPS won't be used with Megasquirt, ha e you figured out which way you'll trigger the MS?
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline amcinstaller

  • Installer, Mechanic, Who Knows.....
  • Eagle Sundaancer
  • ******
  • Posts: 1191
  • Thumbs Up 38
  • So That's Like A Cross Between A Pinto And A Vega?
Re: 4.0L Head and EFI swap
« Reply #11 on: September 12, 2011, 02:32:02 PM »
http://amccars.net/cgi/yabb2/YaBB.pl?num=1180803230/30

your megasquirt should work the same, or at least close. this one is turbo, and a 4.0.
www.decibelcar.com
www.jeepstrokers.com
1980 AMC Spirit GT  Restomod In Progress
1998 Dodge Stratus  Boring DD With Loud DD Bass
Liquid Audio Styling and Sound
Red Deer, AB, Canada

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #12 on: September 12, 2011, 09:39:48 PM »
http://amccars.net/cgi/yabb2/YaBB.pl?num=1180803230/30

your megasquirt should work the same, or at least close. this one is turbo, and a 4.0.
Tom modified the distributor to trigger the Megasquirt. He's quite the smart guy.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #13 on: September 14, 2011, 09:53:25 PM »
Debating on the MS trigger.  I am either going to use the distributor like many have, or my favored option, switching to a coil on plug setup like the newer model 4.0's and running a reluctor ring on the crank dampner to trigger the MS.  Right now giving it a proper break in is on top of the list though. Finaly got a few hours to do some work on it yesterday.  I was able to mount the fuse box and fab up a mount for my fuel pressure regulator, I wanted to put it up in the engine bay to keep it accessible and more accurate at the rail.  I also got my radiator, fan, and rest of my plumbing back in.  Pulled out the cable to rig up my transmission pressure actuator, just used the cable housing from the donor 95' Jeep and made a bracket to mount to the back of the tranny, I then went to the local Tractor Supply and grabbed a length of same size cable that was long enough to mount to the actuating arm.  Had to stop work to check out another side job and because I ran out of Fuel Injection hose clamps (I was 3 short :().  Hopefully Friday will be the break-in day.  Maybe post pics Saturday and a short description to keep everyone from guessing, lol.

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #14 on: October 12, 2011, 04:09:53 PM »
Your project has me interested... I wanted to get some numbers down on mine so bad, and I was just a week or two away from doing it. MAKE SURE you get teh right size injectors the first time, should be no less than 24lbs/hr. I think I may have toasted the ring in the one I sold from a super lean condition at some point in time. Take it to a mechanic with a OBDI capable scan tool and have them check your fuel trim once it's running.  I'm very interested in the numbers...
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #15 on: October 12, 2011, 04:45:17 PM »
Your project has me interested... I wanted to get some numbers down on mine so bad, and I was just a week or two away from doing it. MAKE SURE you get teh right size injectors the first time, should be no less than 24lbs/hr. I think I may have toasted the ring in the one I sold from a super lean condition at some point in time. Take it to a mechanic with a OBDI capable scan tool and have them check your fuel trim once it's running.  I'm very interested in the numbers...
Just curious how you came up with the 24lb. injectors number? Just like the original poster, I have the 4.0 head swap with a Comp Cams camshaft. A friend of mine who is well versed in EFI told me the stock Jeep injectors should be fine based on his calculations. Also you were running E85 do you think that may have something to do with your lean condition?

Carguy I figured out how I'm going to trigger my MS. The Motorcraft distributor uses a VR sensor and I will use that to trigger through my MSD ignition. It won't be as accurate a trigger with a 36-1 wheel on the crank using EDIS, but since these engines don't rev to high it shouldn't be a problem.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #16 on: October 13, 2011, 08:24:35 AM »
Wow, work is still crazy, 6 days a week and on Sundays all the house work.  I calculated at least 27lb/hr injectors for my buildup.  If you used a stock block, that could be the reason, but I had to bore my 4.2L block .030" over to get good fit between the pistons and the cylinders, I also put an open filter style intake on which will deliver much more air paired with the 92' 4.0L camshaft.  I am going with a set of EV6 injectors with the old EV1 style electrical hookup, they provide a much more efficient spray pattern and are more of a variable rate injector, meaning I can play with my fuel pressure to lean out or beef up the mixture and not run into stumbling or driveability issues.  I like your idea of the motorcraft distributor for the trigger, but as I have mentioned, I am going to do away with that inaccurate power robbing dinosaur as soon as I can.  If you would like, I can put a link here that will explaine to you how to calculate what size injectors you need, it is worded much better than anything I can do, lol.  Curious, what did you do for your kickdown?  Did you remember to change to a cooler sparkplug over stockers?

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #17 on: October 13, 2011, 09:44:12 AM »
I'd like to see the link for injector sizing.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #18 on: October 13, 2011, 09:45:21 PM »
http://www.jeep4.0performance.4mg.com/tech_specs.html

Navigate and read all specs on this page for all parts, EXTREMELY helpful information.
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #19 on: October 13, 2011, 09:54:02 PM »
Your project has me interested... I wanted to get some numbers down on mine so bad, and I was just a week or two away from doing it. MAKE SURE you get teh right size injectors the first time, should be no less than 24lbs/hr. I think I may have toasted the ring in the one I sold from a super lean condition at some point in time. Take it to a mechanic with a OBDI capable scan tool and have them check your fuel trim once it's running.  I'm very interested in the numbers...
Just curious how you came up with the 24lb. injectors number? Just like the original poster, I have the 4.0 head swap with a Comp Cams camshaft. A friend of mine who is well versed in EFI told me the stock Jeep injectors should be fine based on his calculations. Also you were running E85 do you think that may have something to do with your lean condition?

Carguy I figured out how I'm going to trigger my MS. The Motorcraft distributor uses a VR sensor and I will use that to trigger through my MSD ignition. It won't be as accurate a trigger with a 36-1 wheel on the crank using EDIS, but since these engines don't rev to high it shouldn't be a problem.

My engine was bored to .030 over, and a stock 4.2 is larger than a 4.0 to begin with. Stock jeep injectors (at least, the most common ones) are around 19-21 lbs/hr for 4.0s. In addition. E85 requires an AFR of around 10:1 vs 14.7:1 for gas. 24s are the smallest you can use, without dangerously increasing the injector duty cycle which can cause premature failure. There are a few very well known efi swap builds in which the authors stress that stock injectors will not work. A 24lb injector can push up to 30 lbs with increased fuel pressure. Mine are rated at 24lb/hr at 39.5 psi, and they are the plastic bodied design III with EVI connectors.
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #20 on: October 14, 2011, 06:25:29 AM »
http://www.fordracingparts.com/download/charts/Fuel_Injectors_and_Adaptors.pdf
This is a great link to explain everything properly.  Stock injectors for our 91-95 HO 4.0's actually run 23.6lb/hr at 3bar or 43.5psi.  And my compression is more than high enough as I had my head machined .010" to true and the block had to be machined as well.  Problem with E85 is if you go with cheap components, they don't hold up properly and can be pitted because of the fuel.  Most machine shops will recommend using chromoly ring sets when planning on running E85.

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #21 on: October 14, 2011, 06:29:40 AM »
And I would highly recommend switching to an EV6 style injector or disc style, over the pintle style EV1's that come stock on the Jeep's.  Those pintle style are not as adaptable to changes in fuel pressure and can become erratic in operation and cause premature failure if too much fuel pressure is used, and lower fuel pressure can cause a poor spray wich will cause stumbling and stuttering of the engine.  On top, the EV6's have a much better spray pattern which cause fuel atomization for a better fuel/air mixture, the EV1 style tend to shoot a stream like you'd expect from a squirt gun.

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #22 on: October 14, 2011, 08:41:24 AM »
Thanks for the links. I purchased 19lb EV6 injectors already. I think they'll do just fine for my application. I've got an adjustable fuel pressure regulator so I can make some adjustments if necessary.
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #23 on: October 14, 2011, 01:01:24 PM »
Thanks for the links. I purchased 19lb EV6 injectors already. I think they'll do just fine for my application. I've got an adjustable fuel pressure regulator so I can make some adjustments if necessary.

Pay close attention to your burn tips by keeping track of your spark plug ends. To be completely honest 19lbs is probably gonna be slim. That's what I started off with on mine and it was noticibly laggy...
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

Offline eaglefreek

  • Moderators
  • AMC Eagles Den Addicted
  • *****
  • Posts: 4011
  • Thumbs Up 209
Re: 4.0L Head and EFI swap
« Reply #24 on: October 14, 2011, 03:10:18 PM »
Thanks for the links. I purchased 19lb EV6 injectors already. I think they'll do just fine for my application. I've got an adjustable fuel pressure regulator so I can make some adjustments if necessary.

Pay close attention to your burn tips by keeping track of your spark plug ends. To be completely honest 19lbs is probably gonna be slim. That's what I started off with on mine and it was noticibly laggy...
Is that with gasoline or E85?
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear.
1981 AMC Eagle Wagon As Seen On TV  Lost In Transmission


 

"I know he'd be a poorer man, if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #25 on: October 17, 2011, 03:47:41 AM »
Thanks for the links. I purchased 19lb EV6 injectors already. I think they'll do just fine for my application. I've got an adjustable fuel pressure regulator so I can make some adjustments if necessary.

Pay close attention to your burn tips by keeping track of your spark plug ends. To be completely honest 19lbs is probably gonna be slim. That's what I started off with on mine and it was noticibly laggy...
Is that with gasoline or E85?
With gas. I turned the fuel pressure up to 55 PSI with E85, so I was around 29lb/hr on cornohol. Should be 24lb/hr on gas, no less. when I checked fuel trim with engine running, it was still trying to correct 1.6%
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

68AMXGOPAC

  • Guest
Re: 4.0L Head and EFI swap
« Reply #26 on: October 17, 2011, 09:29:26 AM »
Hmmmm so seems I will have to adjust that for the gas - no cornhol here in NY scenerio........ ?or at least none nearby that I know of.We feed our corn to the cows : ) where it belongs.

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #27 on: October 31, 2011, 09:34:31 PM »
Finally got my 30lb./hr. fuel injectors in the mail and installed them Friday, what a difference, I was able to set the timing back properly and lower my fuel pressure and it runs amazingly.  They are a couple pounds higher than what my engine requires, but that will keep from pushing them too hard and leave room for a turbo install at a later date. Now just to get to someone with a pipe bender to finish the last half of the exhaust and this Eagle will be one high flyer again.

Offline captspillane

  • The Perkiomen Eagle Sanctuary
  • Eagle Sundaancer
  • ******
  • Posts: 1097
  • Thumbs Up 137
Re: 4.0L Head and EFI swap
« Reply #28 on: November 01, 2011, 12:06:45 AM »
This discussion has been very helpful. I was about to purchase new injectors for mine. I was planning on one size larger than stock, which would be 24 lbs instead of 21 lbs. I'll be getting the 30 lb injectors instead. My engine is a 4.2 short block bored .060 over. Thanks!
Currently Inspected and Insured as of Jan 2013:
-1985 Eagle Station Wagon 258 T5 Stickshift
-1980 Eagle Station Wagon 258 Auto Fuel-injected with GM TBI

Minor Repairs Underway:
-1982 Eagle SX4 258 T5
-1981 Kammback 2.5L Iron Duke T5

Restoration Efforts Near Completion:
-1982 SX4- 401 NV3550
-1983 SX4- 4.5 MPI NSG370 (6 Speed)

Restoration Efforts Underway:
-1985 SW- 4.0 MPI AX15
-1982 SX4- 4.0 AW4
-1981 SX4- SD33T NV4500 (Turbodiesel 5 speed)

Future Rescue Efforts- '85 Maroon SW, '87 Limited SW, '84 Limited SW, '87 4 door Sedan, '81 2 door Sedan, '88 White SW, '77 4 door Hornet, '74 2 door Hornet, '79 Spirit AMX, '81 Kammback.

RIP- Red '81 SX4, '84 4dr Sedan, '84 SW, '81 SW, '80 Spirit, '83 SW, '83 4dr Sedan

Offline carguy87

  • Eagle DL
  • ***
  • Posts: 197
  • Thumbs Up 11
Re: 4.0L Head and EFI swap
« Reply #29 on: November 03, 2011, 08:46:39 PM »
Haha, no problem, I hope you learned and calculated the proper size for your build.  You might want to consider getting a higher voltage coil for yours to help reduce ignition problems. BTW stock for 91-95 HO are roughly 23.8lb./hr. so 24 would hardly help.  My ride is soo much smoother and much easier getting up to speed now.  Now to just do some tweaks to squeeze all the mpg's out of this sucker, lol. 

Offline thammerman

  • Hatchling
  • *
  • Posts: 4
  • Thumbs Up 0
Re: 4.0L Head and EFI swap
« Reply #30 on: September 11, 2018, 01:18:33 AM »
Wow, it's been hectic here with my new job and the holiday weekend.  I finaly got some time to work on the car yesterday.  I managed to get the engine put together, painted, installed in the car, and most of the electrical installed.  I thinned out the harnesses quite a bit, but I got in a rush and couldn't thin down the harness going to the tranny and inside the vehicle yet, but what I did pull out gave me a lot more room.  For my CPS I welded up some angle iron to hold a piece of flatstock above a hole I cut into the transmission housing.  I will hopefully get a chance to run the plumbing and rest of my vacuum lines tomorrow as I finally have a day off.  I'll add updates and hopefully some pictures of the process in a couple days.
I know it’s been a long time but I was wondering if you were still out there cargiy. I was hoping you had a picture of rigging the cps.

Online vangremlin

  • Administrator
  • AMC Eagles Den Addicted
  • ******
  • Posts: 4413
  • Thumbs Up 212
Re: 4.0L Head and EFI swap
« Reply #31 on: September 11, 2018, 08:40:21 AM »

I know it’s been a long time but I was wondering if you were still out there cargiy. I was hoping you had a picture of rigging the cps.

Looks like carguy last checked in about a year and a half ago.  His email address is shown in his profile, just click on his username in one of his posts.  You'll probably have the best luck emailing him directly.  Good luck!
1981 Kammback 258 - "Pepe"
1980 Coupe 258 - "Ginger
1972 Gremlin X 304
1978 Gremlin 4 cyl 121 - sold
1964 TBird 390 - sold

Offline tougeagle

  • Horses, rodeos, diesel trucks and AMC Eagles
  • AMC Eagles Den Addicted
  • ********
  • Posts: 1726
  • Thumbs Up 75
  • There are many like it, but this one is mine
Re: 4.0L Head and EFI swap
« Reply #32 on: September 25, 2020, 04:25:54 AM »
I'm back guys, and can answer most questions about that build...it will all be from memory though
Upcoming 1982 Wagon "The Silver Bullet"
Goals: 550hp/600tq 4.5L EFI Turbo Stroker, Tremec 6 speed manual
2007 Ram 2500 6.7 Cummins 6 speed 600+hp/1400+tq fully deleted
1998 Honda Civic "the hoopdy"

What's your 'sona?

A dream car does not have to be beautiful in the eyes of others, it's not theirs.

 

SMF spam blocked by CleanTalk